Trusted HVAC and Plumbing Services in Webster Groves, MO

Responded to callback for water pooling on basement floor from air conditioning unit. Upon arrival, discovered condensate drain hose had been cut too short during previous maintenance visit and was not reaching floor drain, causing water to discharge directly onto concrete floor. Replaced inadequate drain line with properly sized hose, ensuring secure connection from evaporator coil drain pan to floor drain. Verified proper drainage flow and confirmed no water leakage onto floor. Unit tested and operating normally with condensate now draining appropriately into floor drain system.

Responded to service call for 10-year-old outdoor A/C unit experiencing excessive water leakage. Upon inspection, diagnosed clogged condensate drain line causing water to overflow from the drain pan. Cleared blockage from drain line, verified proper drainage flow, and confirmed unit was cooling properly with no further leakage issues.

Responded to no-cooling complaint affecting entire residence. Upon arrival, inspected existing HVAC system with A-coil previously installed in 2016. Diagnosed issue, performed necessary repairs to restore cooling function, and documented equipment condition with photos. System tested and verified operational before departure.

Completed comprehensive cooling season tune-up on 14-year-old Bryant air conditioning system. Performed standard preventive maintenance protocol including visual inspection of blower motor assembly, verified electrical connections at indoor unit, and conducted amperage draw testing on outdoor condensing unit using calibrated clamp meter to confirm compressor and fan motor operation within manufacturer specifications. System found operating properly with no deficiencies noted; all components functioning as designed.

Responded to recall for 9-month-old AC unit experiencing frozen evaporator coil and loss of cooling capacity. Upon arrival, performed system diagnostics using digital manometer to measure refrigerant pressures and airflow parameters. Inspection revealed severely clogged air filter restricting airflow, which was primary cause of coil freezing and inadequate cooling performance. Documented condition of dirty pleated filter with photographic evidence showing excessive dust and debris accumulation. Replaced contaminated filter with new unit and allowed system to thaw completely before restart. Educated customer on proper filter maintenance schedule and appropriate filter specifications for their system to prevent future freezing issues. Verified system operation and airflow restoration after filter replacement. Addressed customer concerns regarding previous installation and filter maintenance requirements, recommending standard monthly filter changes with MERV-rated filters appropriate for

Responded to no cooling complaint on ground-mounted unit U10. Found condenser fan motor not operating while compressor was running. Diagnosed failed dual run capacitor using digital manifold gauges and visual inspection of electrical components. Replaced TITAN PRO TRCFD355 capacitor rated at 440/370 VAC. Verified all electrical connections secure, tested system operation, and confirmed condenser fan motor and compressor both cycling properly with correct amperage draw. Unit cooling normally upon departure.

Performed comprehensive cooling system tune-up on 1-year-old Lennox air conditioning unit with no reported operational issues. Completed full system inspection including condenser unit evaluation, refrigerant level verification, electrical component testing, and airflow assessment. Filter inspection revealed heavy dust and debris accumulation requiring replacement to maintain optimal system performance and indoor air quality.

Installed portable dehumidifier unit in basement utility area and connected drainage hose to existing floor drain for condensate removal. Verified unit operation and proper drainage flow. System is functioning as designed to control humidity levels in the space.

Completed electrical estimate for residential home generator installation and garage wiring upgrade. Assessed existing electrical service entrance, metering equipment, and main distribution panel to determine capacity for additional load requirements. Evaluated routing options for new electrical circuits from main panel to detached garage structure and determined specifications for generator transfer switch installation.

Responded to service call to reinsulate refrigerant lines on outdoor AC compressor unit in preparation for occupancy inspection. Removed deteriorated insulation from suction and liquid lines running from exterior condensing unit, cleaned copper piping, and installed new foam pipe insulation with proper sealing and weatherproofing. Secured all insulation joints, verified proper drainage line function, and confirmed system met code requirements for inspection approval.

Responded to no power complaint affecting third-floor thermostat and AC unit. Diagnosed electrical issue and restored power to system. Per customer request, configured thermostat to disable cooling mode while maintaining fan operation for air circulation.

Completed electrical estimate for garage fixture installation in attic space with exposed structural framework. Assessment included evaluation of existing fluorescent lighting, conduit routing along wooden beams, junction box placement, and determination of materials required for fixture upgrades. Documented current wiring configuration and structural mounting points for fixture installation planning.

Responded to service call for insufficient cooling on 12-year-old Lennox air conditioning system. Upon arrival, performed visual inspection of outdoor condensing unit and discovered severely restricted airflow due to heavy accumulation of dirt, dust, and debris completely coating the condenser coil fins and side intake panels. The thick layer of contamination was significantly impeding heat transfer efficiency and reducing system capacity. Cleaned condenser coils thoroughly to restore proper airflow and heat exchange capability. Removed accumulated debris from intake panels and surrounding unit exterior. System airflow and cooling performance restored to normal operating parameters following cleaning procedure.

Responded to recall for AC unit not cooling with frozen evaporator coil on 9-month-old system. Upon inspection, verified proper operation of TXV valve and confirmed refrigerant metering components functioning correctly. System tested and operating within normal parameters with no refrigerant leaks detected.

Replaced evaporator coil (S/N 1524L03873) on system originally installed in December 2024. Upon completion, performed refrigerant system checkout using manifold gauges to verify proper pressures, superheat, and subcooling values. System tested and operational for both heating and cooling modes, with all parameters within manufacturer specifications.

Performed diagnostic inspection of HVAC system using borescope camera to examine internal components and confined spaces within the unit. Documented findings with digital imaging for service records and quality assurance purposes.

Completed installation of three ceiling fan-rated electrical boxes and wall-mounted light fixtures throughout residential hallway and adjacent room. All fixtures installed per code with proper mounting hardware, tested for operation, and confirmed illumination quality meets specification.

Responded to callback for 5-month-old installation reporting unit blowing warm air with no cooling. Upon arrival, inspected ground-level condenser and attic air handler. Investigated electrical connections at junction box and terminal block, documenting wiring configurations including low-voltage control wiring and line voltage connections. Verified proper wire terminations, wire nut connections, and flexible metallic conduit installations. Traced thermostat circuit and checked for loose connections or improper wiring that could cause cooling failure. System restored to proper operation with adequate cooling performance confirmed before departure.

Returned to property to replace 25 feet of deteriorated condensate drain hose on HVAC unit. Removed old damaged drain line, installed new drain hose from truck stock, and verified proper drainage operation. System tested and confirmed operational for both heating and cooling functions.

Responded to no cooling complaint on 12-year-old residential air conditioning system. Upon arrival, performed diagnostic evaluation of outdoor condensing unit per special instructions. Identified failed dual-run capacitor (45/5 μF) serving compressor and condenser fan motor. Capacitor showed signs of deterioration and was unable to hold proper charge, resulting in inadequate cooling performance and fan motor failure. Removed defective capacitor and installed new OEM-spec replacement unit. Verified proper electrical connections, tested compressor amperage draw, and confirmed condenser fan motor operation. System restored to normal cooling operation with all components functioning within manufacturer specifications.