Professional Belleville, IL HVAC & Plumbing Contractor

Completed electrical estimate for panel upgrade to accommodate 240-volt convection oven installation. Assessed existing fused electrical panel and exterior meter configuration to determine requirements for dedicated 240V circuit installation. Documented current panel capacity and service entrance conditions for scope of work development.

Completed comprehensive tune-up service on single residential AC unit located in raised basement configuration per Home Depot promotional maintenance agreement. Performed standard preventive maintenance procedures including inspection of blower motor assembly, verification of electrical connections and indicator lights, and replaced air filtration media with new pleated filters to ensure optimal system airflow and efficiency.

Performed comprehensive HVAC tune-up maintenance on residential heating and cooling system. Inspected electrical control panel, verified proper wiring connections and control board operation, and examined air filtration components. Evaluated outdoor condenser unit and noted moderate dust and debris accumulation on cooling fins, which is typical for units 8-12 years of age. All system components were assessed for proper operation and the unit was found to be functioning within normal parameters.

Completed annual cooling maintenance on single HVAC unit per membership agreement. Performed comprehensive tune-up including inspection and cleaning of evaporator coil, replaced air filter with new pleated media filter, checked refrigerant levels and pressures, tested capacitor operation and electrical connections, verified proper airflow and system cycling. All components found operating within normal parameters with no deficiencies noted. System running efficiently and ready for continued cooling season operation.

Completed AC tune-up on single ground-level unit located in garage area. Inspected and replaced heavily soiled return air filter showing significant dust and debris accumulation. Cleaned return air grille which exhibited substantial buildup of dirt, dust, and fibrous material behind louvers, restricting proper airflow to system.

Completed comprehensive tune-up service on single R-410A air conditioning unit located at ground level in rear of property. Inspected and documented equipment specifications, verified proper refrigerant type labeling, and checked existing 16x25x1 pleated air filter for condition and proper fitment within the system.

Completed scheduled tune-up and maintenance service on operational HVAC system over 10 years old. Inspected air handler unit interior, control board, and electrical connections; noted significant dust accumulation, deterioration of interior surfaces, and general wear consistent with system age. Documented existing insulation materials present at service location for reference.

Completed comprehensive air conditioning tune-up service on single residential unit with indoor air handler located in basement and outdoor condensing unit. Performed standard maintenance protocol including inspection of blower assembly, electrical connections, and heat exchanger coil which showed moderate dirt accumulation on fins. System operational upon completion with all components functioning within normal parameters.

Completed preventative maintenance tune-up on two residential air conditioning units per Home Depot work order F59039812. Performed comprehensive system inspections on both outdoor units, including electrical connections, refrigerant levels, and component operation. Inspected indoor air handler and replaced 16x20x1 air filter which showed moderate dust accumulation, ensuring proper airflow and system efficiency for continued optimal performance.

Completed preventive maintenance tune-up on outdoor condensing unit (O10 model) elevated on mounting brackets. Inspected and documented electrical connections at contactor and terminal block, verified all wire terminations secure with no signs of overheating, and confirmed proper equipment operation. All system components found in acceptable working condition with normal wear appropriate for unit age.

Completed comprehensive tune-up service on single outdoor AC unit as part of Home Depot maintenance program. Upon inspection, discovered significant dust and debris accumulation on return air grille and blower wheel assembly, which was cleaned and cleared to restore proper airflow and system efficiency. All routine maintenance tasks performed including filter inspection, component lubrication, and operational testing to ensure unit is running at optimal performance levels.

Performed complimentary second opinion evaluation on Bryant air conditioning system. Inspected outdoor condenser unit, verified refrigerant charge levels, and assessed furnace operation. Unit found to be operating within normal parameters with adequate refrigerant charge and proper system function.

Installed Ring floodlight camera with dual-head motion sensor security lighting on exterior soffit above sliding glass door. Completed electrical bypass box installation to provide proper power supply to the fixture, ensuring full functionality of both the camera system and motion-activated LED floodlights.

Completed cooling system tune-up on basement-located unit under 10 years old. Performed comprehensive maintenance inspection, verified thermostat operation at 75 degrees, and documented system components including air handler and filtration system. All equipment operating within normal parameters.

Completed comprehensive cooling system tune-up on 3-year-old residential AC unit located in backyard. Performed standard maintenance protocol including inspection of condenser unit, evaporator coil assessment, refrigerant level verification, electrical connection evaluation, and blower assembly examination. System components showed normal wear consistent with age, all operating parameters within manufacturer specifications. Unit tested and confirmed functioning properly upon completion.

Installed exterior electrical junction box and wiring to provide bypassed power supply for Ring doorbell installation. Mounted octagonal metal junction box on exterior soffit trim and ran appropriate gauge wiring to doorbell location, ensuring proper connection and weatherproof installation for reliable operation of smart doorbell system.

Responded to service call for water accumulation at base of furnace unit located in utility closet. Upon inspection, found drainage system experiencing backup issues with visible water staining on tile flooring beneath unit. Primary condensate drain line showed signs of improper drainage, causing water to pool around furnace base rather than evacuating through drain system. Inspected PVC drain assembly configuration and connections to identify source of drainage malfunction. Assessed condition of drain pan and surrounding plumbing connections. Documented water damage evidence on flooring and evaluated extent of moisture exposure around appliance base. Unit is over 10 years old and requires drainage system correction to prevent further water accumulation and potential equipment damage.

Completed comprehensive cooling season tune-up on 4-year-old Goodman air conditioning system. Performed full system inspection including blower motor assembly, electrical connections, and air filtration components. Inspected blower motor housing and mounting hardware, verified all electrical wiring connections and control board functionality, and evaluated air filter condition. All multi-colored control wiring bundles, connectors, and zip tie management were inspected for proper securing and connections. Pleated air filter showed normal dust accumulation for seasonal use. System operational parameters confirmed within manufacturer specifications, with blower assembly and all mechanical components functioning properly with no signs of deterioration or damage noted.

Completed comprehensive cooling system tune-up on a 2-year-old residential AC unit located in backyard. Performed standard maintenance protocol including inspection of condenser unit, cleaning of exterior panels which showed significant dirt accumulation, and verification of system operation. Documented unit condition with photos showing ductwork components and outdoor condenser unit with service gauges connected for refrigerant pressure testing and system diagnostics.

Completed comprehensive cooling maintenance on two air conditioning systems aged 9 and 15 years. Performed AC tune-up procedures including inspection of control board, electrical connections, blower assembly components, and motor housing. All wiring connections were verified secure, control boards inspected for proper operation, and blower motor assembly examined for wear. Both systems tested and confirmed operational upon completion of preventive maintenance services.