Professional Belleville, IL HVAC & Plumbing Contractor

Completed comprehensive tune-up service on residential HVAC system less than 10 years old located in backyard. Performed standard maintenance inspection including examination of air handler components, control board, electrical connections, and wiring harnesses. Inspected HDX air filter installed in return plenum (14x20 size) and verified proper fitment within ductwork system. All electrical connections, wire bundles, and control board terminals were inspected and found secure with no signs of overheating or corrosion. System operational and functioning within normal parameters upon completion of tune-up service.

Completed comprehensive tune-up service on single AC unit located in washroom area. Performed standard maintenance inspection of all system components, including electrical connections, capacitor, control board, and wiring harness. Installed new FILTERBUY pleated air filter to ensure proper airflow and system efficiency.

Completed comprehensive air conditioning tune-up service on single residential unit located near washroom area. Performed standard maintenance inspection including evaluation of control board assembly, electrical connections, and system components. Inspected and documented condition of 16x25x1 air filter showing moderate dust accumulation, examined circuit board with relay controls and verified all wire connections and safety warning labels were intact and functional.

Responded to callback for reported AC leak that could not be previously replicated due to weather conditions. Upon arrival, accessed air handler unit located at rear of home and inspected system during active cooling operation. Found significant condensation accumulation on supply plenum and flex ductwork in attic space, with water droplets visible on metal surfaces and duct insulation. Identified condensation as source of reported leak rather than refrigerant or drain line issue. Verified drain pan and condensate line were clear and functioning properly. System operating within normal parameters with adequate airflow through blower assembly.

Conducted on-site electrical assessment for installation of new recessed lighting fixture in living room with textured popcorn ceiling and vertical wall paneling. Evaluated ceiling structure, existing electrical infrastructure, and optimal fixture placement to provide comprehensive estimate for recessed light installation.

Replaced refrigerant line set for HVAC system requiring access to crawl space beneath home. Deployed protective tarps due to wet conditions under structure before performing work. Documented existing conditions showing deteriorated insulation, accumulated debris, and contaminated air handler components with significant biological growth and material buildup on coils and interior surfaces. Line set replacement completed as warranty work related to original installation.

Completed comprehensive tune-up service on single outdoor AC unit. Performed system inspection including electrical control panel examination, verified all circuit board connections and transformer operations were functioning properly. Replaced air filter with new 3M Filtrete unit and documented equipment specifications for maintenance records.

Completed preventive maintenance tune-up on a 2-year-old residential HVAC system. Performed comprehensive inspection of outdoor condenser unit, noting debris accumulation around base and concrete pad requiring cleaning. Inspected indoor air handler and discovered significant dust buildup on evaporator coil and filter assembly, indicating overdue filter replacement. Cleaned condenser coil fins, cleared debris from unit perimeter and concrete pad, replaced air filter, and verified system operational status. All components functioning properly following service completion.

Completed comprehensive tune-up service on a 1-year-old ground-level air conditioning unit as part of Home Depot service agreement. Performed standard maintenance procedures including inspection of blower motor assembly, verified electrical connections and wiring integrity, and replaced air filter with new pleated media filter. All components found operating within normal parameters with no deficiencies noted.

Responded to no heat call on a single-zone electric HVAC system. Upon inspection, accessed the unit's electrical cabinet and reviewed the 240V single-phase, 20KW 2-stage heating system wiring schematic and component layout. Performed diagnostic evaluation of the circuit breaker panel, blower assembly, and heating elements to identify the cause of insufficient heat output. Documented existing equipment configuration including capacitor, transformer, and control wiring for service records.

Responded to callback for inspection-related deficiencies on recent HVAC installation. Corrected improperly sized breaker in electrical panel for air conditioning unit to meet code requirements. Installed walk boards in attic for safe access to equipment per inspector requirements. Installed pull chain light fixture in attic to provide adequate illumination for service access. All corrections completed to satisfy final inspection requirements for property closing.

# HVAC Service Report - Cooling System Tune-Up Completed comprehensive cooling system tune-up on 10-year-old residential AC unit located in backyard. Performed full system inspection including thermostat functionality check, electrical connections assessment, and internal component evaluation. All components found operating within normal parameters; system tested and confirmed ready for cooling season operation.

Completed comprehensive electrical home audit, including thorough inspection of main electrical panel containing approximately 20-24 circuit breakers with organized wire bundles. Examined panel directory and wiring connections for safety compliance, documented existing electrical infrastructure with detailed photographs for reference, and verified proper circuit labeling to ensure household electrical system meets current safety standards.

Completed removal of deteriorated galvanized piping system and installed new copper piping throughout the property, servicing two bathrooms, kitchen sink, two exterior hose bibs, water heater and boiler. Work included accessing basement/crawlspace infrastructure to ensure proper connections to existing systems while maintaining structural integrity of the building.

Responded to service call for furnace slow leak issue in basement. Deployed submersible pump to extract accumulated water around heating system. Identified potential heat exchanger leak causing water discharge that was not properly routing to drainage system.

Successfully completed mini-split blower cleaning service on Daikin wall-mounted unit as scheduled. Technician arrived with jet pack equipment and thoroughly cleaned interior blower components to restore proper airflow and system efficiency. Unit is now operating correctly in both heating and cooling modes.

Performed scheduled heating maintenance on 9-year-old furnace and heat pump system. Inspected and replaced air filter with clean unit. Verified proper thermostat operation with Sensi digital control showing appropriate temperature readings. System is functioning correctly; customer enrolled in regular maintenance program.