Your home has a lot of appliances that need repair and maintenance. Without it, energy costs and repair bills will increase. Faulty plumbing and malfunctioning HVAC systems are also unsafe. And that’s where we can help.
Since 1926, Classic Aire Care has provided exceptional HVAC and plumbing services in Ballwin.
Our NATE-certified technicians are background-checked and carefully vetted. With 24/7 emergency repair service available, we can tackle the biggest or smallest home repair issue.
Expert Air Conditioning Services
With summers hazy, hot, and humid in Ballwin, your AC is under demand to perform. Whether you need repair work or want to upgrade your unit, we can help. Our AC services include:
- AC Repairs: Our technicians service all brands and offer same-day service. Common issues include insufficient cooling, strange noises, and cycling problems. Our Planned Maintenance Agreement includes exclusive savings like 15% off our repairs.
- AC Maintenance: Routine service can extend your air conditioner’s life span and reduce repair costs. Let our technicians inspect your system and make any necessary repairs.
- AC Replacement: Older air conditioners can lose their efficiency. Let us recommend the best replacement that fits your needs and lower your energy costs by up to 30%! Ask us about improving indoor air quality and cost-saving, ductless mini-split systems.
Get a free estimate on a new AC in Ballwin by calling Classic Aire Care at (314) 329-1943.
Dependable Heating Services
Winters can be brutal in Missouri, and when the temperature drops below freezing, your furnace or heat pump should provide toasty warm heat in every room. If your HVAC is not working, or you want to upgrade to a more efficient version, turn to us. Our heating services include:
- Heating repair: Our technicians are available 24 hours if your heater is underperforming. With our vehicles stocked, we will efficiently and quickly make repairs.
- Heating replacement: Replace your older heater with a modern version and decrease utility costs. With tax credits available, the savings add up!
- Heating maintenance: Regular tune-ups mean fewer emergency repairs. Schedule biannual maintenance to keep your HVAC working at peak performance.
Your Local Plumbing Experts
Your home’s plumbing can include outdated and corroded pipes that eventually need repair or replacement. Our plumbing installation and replacement solutions include water heater replacement for corrosion, loss of heat, or leaks.
Our tankless replacements provide an endless hot water supply, while our backflow preventer replacements will keep your water contaminant-free. Rely on our professionals for plumbing repairs like water problems (disposals, toilet leaks, clogged drains, low faucet pressure), or burst or leaking pipes.
Schedule same-day plumbing service in Ballwin by calling Classic Aire Care at (314) 329-1943.
Why Choose Classic Aire Care?
At Classic Aire Care, we’ve been making people comfortable since 1926! Our NATE-Certified technicians are dedicated to your comfort, and we guarantee superior workmanship and solutions you can depend on. When you choose our team, you will always enjoy:
- 100% satisfaction guarantee on installations
- Classic ultimate quality guarantee
- Free estimates
- Exceptional service agreements
- 24 hours a day, 7 days a week emergency service
- And more!Â
Call Classic Aire Care at (314) 329-1943 for same-day repairs in Ballwin.
FAQs
Why is my AC running but not cooling?
Your AC has several components that operate independently; if the evaporator coils freeze or something compromises a heat exchanger, you’ll get air, but it won’t be cool. If the blower breaks, you’ll have cool refrigerant in place but no air blowing it out.
How often should I schedule HVAC maintenance?
As a general rule, you should have your home’s HVAC system inspected and serviced at least once a year. Twice a year (once for heating and once for cooling) would be ideal.
What are the signs that I need to replace my HVAC system?
Frequent breakdowns, rising energy bills, and fluctuating indoor temperatures are all strong signs that it’s time for an HVAC system replacement.
How can I improve my home's indoor air quality?
Keep the house well-ventilated by opening the windows and using fans. You can also use air purification devices, and avoid smoking or using products that contain volatile organic compounds (VOCs).
What should I do if I have a clogged drain?
Try using a plunger or a chemical drain cleaner. If that doesn’t work, it’s best to call a professional plumber.
Have you Seen Us in Ballwin?
Classic Aire Care’s van with the family of penguins is easily one of the most recognizable vehicles in St. Louis. Below is a map showing where our family of penguins have been recently!Â
Recent Jobs and Reviews in Ballwin, MO
Job Locations and Reviews
Completed preventive maintenance tune-up on outdoor condensing unit located in side yard. Performed electrical diagnostics using digital multimeter, measuring capacitor functionality and recording voltage reading of 6.19 volts. Inspected control board wiring and connections, verifying proper operation of SureLight circuit board and associated low-voltage wiring harness including multiple circuit connections for system controls and safety devices.
Completed warranty evaporator coil replacement on residential HVAC system. Removed failed evaporator coil from air handler unit and installed new Lennox warranty replacement coil. Verified proper refrigerant line connections, tested system operation in cooling mode, and confirmed adequate airflow through new coil. Documented installation with photographs of completed work per warranty requirements and retained old coil for warranty processing.
Completed comprehensive cooling tune-up maintenance on two HVAC units for new customer. Both units are approximately one year old, with one ground-mounted outdoor condenser and one basement-located unit. Performed standard U10 cooling system inspection protocol on both systems, including electrical component testing, capacitor evaluation, refrigerant pressure checks, and airflow assessment. Outdoor unit exhibited heavy dirt and debris accumulation on condenser coils and louvered panels, which was documented. All electrical connections, wiring, and mounted components were inspected and found to be properly secured and functional despite outdoor exposure conditions.
Completed installation of new fluorescent light fixtures per approved estimate. Mounted white linear fluorescent fixture to ceiling with proper measurements and alignment verified using measuring tape. Routed flexible metallic conduit along wall surface to fixture location, ensuring secure attachment and code-compliant installation. All electrical connections completed, fixtures tested and verified operational upon completion.
Completed cooling season tune-up on 2-year-old heat pump system. Performed comprehensive maintenance including inspection of outdoor condenser unit, verified proper refrigerant levels, cleaned condenser coils showing minor dirt accumulation, checked electrical connections, and tested system operation. Confirmed Sensi thermostat functioning correctly in auto mode at 77°F setpoint with proper communication to heat pump unit. System operating within manufacturer specifications with no repairs required at this time.
Responded to no-heat call to inspect furnace following level three black water contamination event. Upon inspection in crawl space, confirmed extensive contamination of furnace and ductwork with visible black water staining, discoloration, and microbial growth throughout heating system components. Documented conditions with photographs and provided detailed written assessment confirming that furnace and affected ductwork require full replacement due to Category 3 water contamination, which poses health hazards and renders equipment non-salvageable per industry standards and insurance requirements.
Completed comprehensive cooling maintenance on a 15-year-old air conditioning system. Performed standard tune-up procedures including inspection of electrical components, control board, transformer, and relay systems within the air handler compartment. Observed significant frost and ice accumulation on evaporator coil surfaces, indicating potential airflow restriction or refrigerant charge issues. All electrical connections, wiring harnesses, and control components verified to be in proper working condition. System confirmed operational at time of service completion.
Replaced defective condenser coil on residential HVAC system due to abnormal noise concerns. Retrieved replacement coil from supply location, removed and disposed of failed component under warranty, and installed new Lennox condenser coil in condensing unit. Performed system startup, verified proper operation in cooling mode with thermostat set to 77°F, and completed routine maintenance service as requested to ensure optimal system performance.
Completed comprehensive U10 cooling tune-up maintenance on two residential HVAC systems. Performed full system inspection on both units, including outdoor condenser unit located on side of property and indoor air handler components. Inspected blower motor assembly, electrical connections, and control modules. Noted significant debris accumulation around exterior unit including leaves, dirt, and organic matter in recessed installation area. Documented existing conditions of both systems through photographic inspection. All standard preventative maintenance protocols executed per U10 specifications on both cooling systems.
Replaced defective evaporator coil under warranty on Trane HVAC system, S/N 19182SNGCG. Removed failed coil from furnace unit, installed new replacement coil, reconnected refrigerant lines and ductwork, and verified proper system operation. Retained original coil per warranty requirements.
Completed comprehensive cooling tune-up on outdoor AC unit located on side of home. Performed standard maintenance protocol including inspection of blower motor assembly, electrical control boards, wiring connections, and verified proper 24VAC power supply to system components. Filter inspected and found in acceptable condition with proper airflow through diamond-pattern pleated media.
Responded to no cooling call on ground-mounted heat pump unit. Upon arrival, found outdoor unit heavily soiled with accumulated dirt, dust, and grime on exterior panels, with significant debris buildup including dried leaves and twigs collected at base. Performed diagnostic assessment and thorough cleaning of condenser coil and exterior components to restore proper airflow and system operation.
Responded to no cooling complaint on 10-year-old outdoor AC unit located in backyard. Upon arrival, utilized Fieldpiece digital manifold gauges to measure system pressures and temperatures. Diagnostic readings revealed low refrigerant charge as the cause of inadequate cooling. Performed leak check, recharged system to manufacturer specifications, and verified proper operating pressures and temperatures. Unit restored to normal cooling operation.
Responded to no cooling complaint on 6-year-old unit where compressor was humming but not starting after circuit breaker tripped. Upon inspection, found compressor locked rotor condition with failed start capacitor preventing proper startup. Replaced defective run/start capacitor, verified proper voltage at contactor, and tested compressor operation. Unit restored to normal cooling operation with compressor running smoothly and proper amperage draw confirmed.
Responded to no cooling call on 15-year-old AC system. Customer reported outdoor unit not running while indoor blower operated normally. Upon arrival, confirmed outdoor condensing unit was not energizing. Performed diagnostic testing and identified failed contactor preventing compressor and condenser fan operation. Replaced defective contactor, restored power to outdoor unit, and verified system cooling properly with normal amperage draws and temperature splits.
Completed comprehensive cooling maintenance and tune-up on a 3-year-old Lennox air conditioning system per Home Depot work order #F59381724. Performed full system inspection of outdoor condenser unit, verified proper operation of compressor and fan motor, cleaned condenser coils, checked refrigerant levels and electrical connections, and confirmed system was cooling effectively with no deficiencies noted. Unit was found in good working condition and left operational upon completion of preventive maintenance service.
Completed cooling system tune-up on a 9-year-old ground-level AC unit. Performed comprehensive inspection of control board and electrical connections, verified all wiring harnesses and terminals were secure, and inspected the air filter which showed moderate dust accumulation consistent with normal operation. All components were found to be functioning properly with no immediate service needs identified.
Returned to complete diagnosis following overnight thaw of frozen evaporator coil. Initial service call found no cooling condition with iced coil and inoperative blower motor. Inspected outdoor condenser unit and verified proper fin condition and cleanliness. Removed access panel to examine internal electrical components including capacitor and associated wiring connections. Documented system conditions with photos for service records.
Installed a 600M humidifier and connected it to the existing S40 thermostat control system, completing all electrical connections and mounting hardware. Performed comprehensive air conditioning maintenance service including filter inspection, system diagnostics, and verification of control board operation. All equipment tested and confirmed operational upon completion.
Completed comprehensive cooling season tune-up on 11-year-old outdoor condensing unit. Performed standard maintenance protocol including coil cleaning, electrical connection inspection, refrigerant charge verification, and operational testing of all components. Unit operating within manufacturer specifications with no deficiencies noted at time of service.
