Call Today (314) 200-1211 Schedule Service

HVAC, Plumbing & Electrical Services in Lake St. Louis, MO

 

Lake St. Louis Service Overview

  • Heating & Cooling: Furnace repair, AC diagnostics, replacements, maintenance, heat pumps, ductless systems, mini-splits, boilers, and geothermal options.

  • Plumbing & Electrical: Leak repairs, fixtures, water heaters, sewer service, gas piping, electrical troubleshooting, panel upgrades, generators, wiring, lighting, and EV charging.

  • Indoor Air Quality: Air purification, HVAC air cleaners, humidification, and dehumidification for different levels and seasonal conditions.

 

Lake St. Louis developed around something most St. Charles County communities do not have at their center: the lake itself. From established homes near Lake Saint Louis and Lake Sainte Louise to development extending toward I-64 and the surrounding 63367 area, local properties range from older lake-community homes to larger, multi-level houses built during later periods of growth. Classic Aire Care provides heating, air conditioning, plumbing, electrical, and indoor air quality service throughout Lake St. Louis, with emergency after-hours help available when a problem cannot wait. Call (314) 200-1211 or schedule your service online today.

“The crew was very courteous and professional. They were super helpful and knowledgeable about any and all questions that I asked. Overall a great experience.”
— Ronnie R

Looking for HVAC Company near Lake St. Louis, MO? Contact Classic Aire Care online or call us at (314) 200-1211 today.

Technician repairing air conditioning unit in Lake Saint Louis

 

Lake St. Louis Homes Can Change From One Floor to the Next

Lake St. Louis was developed as a planned residential community, and many local homes reflect decades of expansion and changing expectations. Properties around the established lake areas can have completely different layouts from homes built during later growth toward I-64, while finished basements, upper floors, additions, and remodeled spaces can further change how the original mechanical systems need to perform.

That creates an important distinction for home service. A comfortable main floor does not guarantee the third floor is cooling correctly, and a finished basement may introduce plumbing, humidity, and heating needs that were never part of the original design. Classic Aire Care looks at the system in the context of the whole property rather than treating every 63367 home the same way.

For home service throughout Lake St. Louis, call Classic Aire Care at (314) 200-1211.

 

Common Lake St. Louis Home Challenges

Problem: An upper floor remains uncomfortable even though the main floor reaches the thermostat setting.

Solution: HVAC service can evaluate equipment performance, airflow, duct design, heat gain, zoning, and other factors before determining whether the entire system needs replacement.


Problem: A finished basement or lower level develops moisture concerns while other areas of the home have different humidity conditions.

Solution: Whole-home humidity management, including dehumidification or humidification, can address seasonal moisture and dryness through the HVAC system.


Problem: A remodeled or finished area adds electrical loads that the original home wiring was not designed to support.

Solution: Electrical service can evaluate panel capacity, existing circuits, wiring, and the requirements of new equipment before additional loads are installed.


Problem: A plumbing problem upstairs sends water into finished spaces below, or a remodeled area develops recurring plumbing issues.

Solution: Plumbing service can trace leaks between floors and evaluate fixtures, drains, water heaters, sewer connections, and plumbing additions based on the home’s current layout.

 

Furnace Repair & Heating Services for Lake St. Louis Homes

Multi-level houses can make heating problems obvious once temperatures fall. Warm air naturally moves upward, but duct layout, thermostat location, equipment performance, additions, and finished spaces can still leave certain areas uncomfortable. In established Lake St. Louis homes that have already gone through furnace replacements, newer equipment may also be working with portions of the original duct system.

Heating services for Lake St. Louis include:

A furnace should do more than satisfy the thermostat closest to it. Our technicians can evaluate equipment operation and heat distribution when upper floors, finished lower levels, or distant rooms are not keeping pace.

 

Electrical Services for Lake St. Louis Homes That Keep Adding More

The electrical needs of a Lake St. Louis home can change significantly over several decades. Finished basements, remodeled kitchens, outdoor entertaining spaces, home offices, additional HVAC equipment, and EVs can all add loads that were not anticipated when an older property was first wired. Lake living can also make dependable backup power valuable when severe Missouri weather interrupts electrical service.

Electrical services for Lake St. Louis include:

Adding a third-floor HVAC unit, EV charger, or other major equipment should begin with the electrical system supplying it. Our electricians can evaluate panel capacity, circuits, and wiring before determining what the new load requires.

Schedule Your Service Today!

Plumbing Services From Upper Floors to Lake St. Louis Basements

Multi-story homes create their own plumbing realities. A failed fixture or supply connection upstairs can send water through finished spaces below, while a basement plumbing problem may affect rooms homeowners use every day. Homes that have been remodeled over the years can also contain plumbing installed during several different periods.

Plumbing services for Lake St. Louis include:

Water damage can travel before becoming visible, especially in a multi-level property. Our plumbers work to trace the source so the repair addresses where the leak started rather than only where the water appeared.

 

AC Repair & Cooling for Lake St. Louis Multi-Level Living

Summer cooling can become complicated when a home has three floors, large windows, finished lower levels, or rooms exposed differently to afternoon sun. Lake St. Louis homeowners may find that the main level feels comfortable while an upper floor stays several degrees warmer. Some properties solve that challenge with separate equipment or ductless systems dedicated to specific areas.

Cooling services for Lake St. Louis include:

A third floor that refuses to cool does not automatically mean the entire central system needs replacement. Equipment capacity, airflow, duct design, heat gain, and zoning all deserve consideration before deciding how to correct the problem.

“I’ve had Classic Aire put in a 3rd floor unit years ago and they did a fantastic job with a high quality unit. So they had a good reputation walking in. Yesterday John really helped us out with a small disaster we had in the basement with our 29+ year old AC. John diagnosed and resolved the problem quickly and economically. He then took great care in explaining how to prevent again. We were so impressed we set up a bi annual service contract”
— Stephen P

Indoor Air Quality Services Around Lake St. Louis

Living around two lakes gives Lake St. Louis a geographic feature that most nearby communities do not share. Missouri already brings substantial summer humidity, and lower levels can develop their own moisture concerns during warm, wet stretches. Once winter heating begins, the same house can swing toward excessively dry indoor air.

Indoor air quality services for Lake St. Louis include:

Humidity can vary between the basement, main floor, and upper levels of the same house. Whole-home equipment can address those conditions through the HVAC system rather than relying on portable units scattered around the property.

 

When Finished Space Expands, Home Systems Have to Follow

Finishing a basement, converting an upper floor, or building an addition changes more than the amount of usable space in a Lake St. Louis home. The new area may need additional heating and cooling capacity, dedicated electrical circuits, new plumbing, better humidity management, or a combination of all four. What began as a remodeling project can quickly change the demands placed on systems originally designed for a smaller floorplan.

Classic Aire Care provides heating, cooling, plumbing, electrical, and indoor air quality expertise under one company. That makes it easier to evaluate how a newly finished or remodeled area affects the rest of the property instead of looking at each system in isolation.

“Brian provided excellent service. He was prompt, courteous and professional. He is exactly what we expect from Classic Aire Care.”
— jim e

Comfort on Every Level of Your Lake St. Louis Home

The basement, main floor, and upper levels of a Lake St. Louis home can each place different demands on the systems behind the walls. Finished lower levels need moisture control, upper floors can challenge cooling performance, remodeled areas increase electrical and plumbing demand, and older equipment may eventually be asked to serve considerably more house than it once did.

Classic Aire Care provides air conditioning, heating, plumbing, electrical, and indoor air quality service throughout Lake St. Louis and 63367. Whether your home is near the established lake community

FAQs for Lake St. Louis Homeowners

Classic Aire Care provides furnace diagnostics and repair, emergency heating, heating replacement, new furnace installation, boiler service, heat pump care, geothermal options, AC diagnostics, cooling response, central AC replacement, preventive maintenance, ductless cooling, mini-split service, and other HVAC solutions throughout Lake St. Louis and 63367.

Yes. Upper-floor comfort can be affected by equipment capacity, airflow, duct design, heat gain, zoning, and room layout. Service can evaluate these factors before determining whether the issue requires repair, ductless cooling, additional equipment, or another solution.

Plumbing services include emergency leak response, toilet and fixture repairs, plumbing additions, drain clearing, water heaters, sewer troubleshooting, leak detection, gas piping, backflow protection, disposal repairs, and commercial plumbing around Lake St. Louis.

Yes. Electrical services include troubleshooting, new circuits, backup generators, surge protection, outlets and fans, rewiring, panel upgrades, lighting, electrical inspections, and EV charging throughout 63367.

Yes. Indoor air quality services include air purification, HVAC air cleaners, humidifiers, and dehumidification. These options can address different conditions between basements, main floors, and upper levels as seasonal humidity and dryness change.

 

Recent Jobs and Reviews in Ballwin, MO

Ballwin, MO at a glance

Classic Aire Care has completed 20 jobs in Ballwin, MO between October 2026 and November 2026.

The most recent job was on November 10, 2026.

Classic Aire Care has completed 606 jobs in Ballwin, MO in the last 12 months.

Job Locations and Reviews

Performed a heating tune-up on a single gas furnace, including cleaning and inspecting components, verifying PVC intake/exhaust venting, and checking the condensate drain line for proper discharge. Operated the system through a heating cycle and confirmed proper function with the Honeywell digital thermostat calling for heat and the unit running normally.
Performed a heating tune-up on a single gas furnace, including cleaning and inspecting components, verifying PVC intake/exhaust venting, and checking the condensate drain line for proper discharge. Operated the system through a heating cycle and confirmed proper function with the Honeywell digital thermostat calling for heat and the unit running normally.
Mitchell L.
Mitchell L. Checked in
Performed a heating tune-up on a single gas furnace, including cleaning and inspecting components, verifying PVC intake/exhaust venting, and checking the condensate drain line for proper discharge. Operated the system through a heating cycle and confirmed proper function with the Honeywell digital thermostat calling for heat and the unit running normally.
Ballwin, MO 63011
Performed a seasonal heating tune-up on a 15-year-old American Standard gas furnace in a basement mechanical area, inspecting the cabinet, PVC intake/exhaust venting, and ductwork connections and finding no visible rust, frost, or damage. Inspected the Aprilaire humidifier control, which was set in the 25–35% range, and noted light discoloration and staining on the faceplate. System was operating properly at the time of service.
Performed a seasonal heating tune-up on a 15-year-old American Standard gas furnace in a basement mechanical area, inspecting the cabinet, PVC intake/exhaust venting, and ductwork connections and finding no visible rust, frost, or damage. Inspected the Aprilaire humidifier control, which was set in the 25–35% range, and noted light discoloration and staining on the faceplate. System was operating properly at the time of service.
Vince D.
Vince D. Checked in
Performed a seasonal heating tune-up on a 15-year-old American Standard gas furnace in a basement mechanical area, inspecting the cabinet, PVC intake/exhaust venting, and ductwork connections and finding no visible rust, frost, or damage. Inspected the Aprilaire humidifier control, which was set in the 25–35% range, and noted light discoloration and staining on the faceplate. System was operating properly at the time of service.
Ballwin, MO 63021
Performed an on-site electrical estimate for a standby generator installation, evaluating the exterior utility service entrance and existing meter enclosure on the side of the structure. Documented the condition of the meter base, noting chipped and peeling paint, along with the adjacent service conduit, grounding conductor, and utility panel, and assessed the available side-yard space, which includes a weather-covered generator unit, for proper placement and clearances. Findings were recorded to support scoping of the transfer switch connection and service-side wiring.
Performed an on-site electrical estimate for a standby generator installation, evaluating the exterior utility service entrance and existing meter enclosure on the side of the structure. Documented the condition of the meter base, noting chipped and peeling paint, along with the adjacent service conduit, grounding conductor, and utility panel, and assessed the available side-yard space, which includes a weather-covered generator unit, for proper placement and clearances. Findings were recorded to support scoping of the transfer switch connection and service-side wiring.
David Y.
David Y. Checked in
Performed an on-site electrical estimate for a standby generator installation, evaluating the exterior utility service entrance and existing meter enclosure on the side of the structure. Documented the condition of the meter base, noting chipped and peeling paint, along with the adjacent service conduit, grounding conductor, and utility panel, and assessed the available side-yard space, which includes a weather-covered generator unit, for proper placement and clearances. Findings were recorded to support scoping of the transfer switch connection and service-side wiring.
Ballwin, MO 63011
Performed a seasonal tune-up on one Goodman gas furnace, including removal of the front panel for a visual inspection of the burner assembly, gas valve, inducer motor, wiring, and gas supply piping. Verified electrical operation by measuring amperage draw on the unit with a true RMS clamp meter, and noted light rust at the cabinet vents, oxidation on the gas line joints, and some loose wiring for follow-up. Furnace was left operating and ready for the heating season.
Performed a seasonal tune-up on one Goodman gas furnace, including removal of the front panel for a visual inspection of the burner assembly, gas valve, inducer motor, wiring, and gas supply piping. Verified electrical operation by measuring amperage draw on the unit with a true RMS clamp meter, and noted light rust at the cabinet vents, oxidation on the gas line joints, and some loose wiring for follow-up. Furnace was left operating and ready for the heating season.
Brandon F.
Brandon F. Checked in
Performed a seasonal tune-up on one Goodman gas furnace, including removal of the front panel for a visual inspection of the burner assembly, gas valve, inducer motor, wiring, and gas supply piping. Verified electrical operation by measuring amperage draw on the unit with a true RMS clamp meter, and noted light rust at the cabinet vents, oxidation on the gas line joints, and some loose wiring for follow-up. Furnace was left operating and ready for the heating season.
Ballwin, MO 63011
Performed a heating tune-up on a 9-year-old furnace, including a borescope inspection of internal components. The inspection revealed corrosion and rust deposits on the heat exchanger surfaces and heavy corrosion with flaking on the galvanized sheet metal ductwork seam. Findings were documented with photos and recommended for further evaluation and repair.
Performed a heating tune-up on a 9-year-old furnace, including a borescope inspection of internal components. The inspection revealed corrosion and rust deposits on the heat exchanger surfaces and heavy corrosion with flaking on the galvanized sheet metal ductwork seam. Findings were documented with photos and recommended for further evaluation and repair.
Brandon F.
Brandon F. Checked in
Performed a heating tune-up on a 9-year-old furnace, including a borescope inspection of internal components. The inspection revealed corrosion and rust deposits on the heat exchanger surfaces and heavy corrosion with flaking on the galvanized sheet metal ductwork seam. Findings were documented with photos and recommended for further evaluation and repair.
Ballwin, MO 63011
Ballwin, MO - Performed a routine heating tune-up on an approximately 13-year-old furnace with no reported issues, inspecting the unit and its components for proper operation. Replaced the return air filter with a new 20x25 pleated filter and verified correct fit and airflow direction within the filter cabinet.
Anthony L.
Anthony L. Checked in
Performed a routine heating tune-up on an approximately 13-year-old furnace with no reported issues, inspecting the unit and its components for proper operation. Replaced the return air filter with a new 20x25 pleated filter and verified correct fit and airflow direction within the filter cabinet.
Ballwin, MO 63011
Ballwin, MO - Responded to a no-control complaint on a 6-year-old basement unit that was heating but would not allow temperature adjustment at the thermostat. Inspected and diagnosed the Daikin thermostat, then verified its model and serial information and confirmed active registered manufacturer warranty coverage for parts and unit exchange through the online warranty lookup.
Travis A.
Travis A. Checked in
Responded to a no-control complaint on a 6-year-old basement unit that was heating but would not allow temperature adjustment at the thermostat. Inspected and diagnosed the Daikin thermostat, then verified its model and serial information and confirmed active registered manufacturer warranty coverage for parts and unit exchange through the online warranty lookup.
Ballwin, MO 63021
Ballwin, MO - Responded to a no-heat call on a gas furnace in the basement and inspected the unit's control components, including the pressure switch, silicone hose, and control wiring. Observed significant corrosion and oxidation on the galvanized flue pipe elbows and joints, indicating a venting concern that should be addressed to ensure safe and proper combustion exhaust.
Brandon F.
Brandon F. Checked in
Responded to a no-heat call on a gas furnace in the basement and inspected the unit's control components, including the pressure switch, silicone hose, and control wiring. Observed significant corrosion and oxidation on the galvanized flue pipe elbows and joints, indicating a venting concern that should be addressed to ensure safe and proper combustion exhaust.
Ballwin, MO 63011
Ballwin, MO - Responded to a no-heat call on a single-stage gas furnace that was not responding to thermostat calls for heat. Inspected the draft inducer assembly, pressure switch, and associated wiring and vent/drain tubing, and verified connections and condition of the inducer motor and pressure switch circuit. Advised the homeowner to contact the manufacturer to transfer the equipment warranty into their name.
Joe V.
Joe V. Checked in
Responded to a no-heat call on a single-stage gas furnace that was not responding to thermostat calls for heat. Inspected the draft inducer assembly, pressure switch, and associated wiring and vent/drain tubing, and verified connections and condition of the inducer motor and pressure switch circuit. Advised the homeowner to contact the manufacturer to transfer the equipment warranty into their name.
Ballwin, MO 63021
Performed a heating tune-up on one 18-year-old furnace, including inspection of the cabinet, ductwork, and air filter (25x25x1 filter on site). Observed rust and corrosion along the duct seam and dust/residue buildup on the base plate, which should be monitored and addressed to prevent further deterioration. Unit operation was checked and the system left in service.
Performed a heating tune-up on one 18-year-old furnace, including inspection of the cabinet, ductwork, and air filter (25x25x1 filter on site). Observed rust and corrosion along the duct seam and dust/residue buildup on the base plate, which should be monitored and addressed to prevent further deterioration. Unit operation was checked and the system left in service.
Brian S.
Brian S. Checked in
Performed a heating tune-up on one 18-year-old furnace, including inspection of the cabinet, ductwork, and air filter (25x25x1 filter on site). Observed rust and corrosion along the duct seam and dust/residue buildup on the base plate, which should be monitored and addressed to prevent further deterioration. Unit operation was checked and the system left in service.
Ballwin, MO 63021
Performed a seasonal heating tune-up on a 15-year-old furnace that was operating normally prior to service. Inspected the air handler cabinet, evaporator coil, and duct liner, confirming the coil fins were intact with no frost or ice and noting only light fibrous debris on the insulation surface. Also inspected the Aprilaire whole-house humidifier, which was clean and free of rust, cracks, or visible damage, and the system was left in proper working condition.
Performed a seasonal heating tune-up on a 15-year-old furnace that was operating normally prior to service. Inspected the air handler cabinet, evaporator coil, and duct liner, confirming the coil fins were intact with no frost or ice and noting only light fibrous debris on the insulation surface. Also inspected the Aprilaire whole-house humidifier, which was clean and free of rust, cracks, or visible damage, and the system was left in proper working condition.
Roger H.
Roger H. Checked in
Performed a seasonal heating tune-up on a 15-year-old furnace that was operating normally prior to service. Inspected the air handler cabinet, evaporator coil, and duct liner, confirming the coil fins were intact with no frost or ice and noting only light fibrous debris on the insulation surface. Also inspected the Aprilaire whole-house humidifier, which was clean and free of rust, cracks, or visible damage, and the system was left in proper working condition.
Ballwin, MO 63011
Removed the existing burner assembly from the gas furnace and replaced all five burners, with rust and discoloration observed on the burner tray and brackets. Reinstalled the burner assembly with the igniter and flame sensor hardware, reconnected the wiring and gas line, and disposed of the removed burners.
Removed the existing burner assembly from the gas furnace and replaced all five burners, with rust and discoloration observed on the burner tray and brackets. Reinstalled the burner assembly with the igniter and flame sensor hardware, reconnected the wiring and gas line, and disposed of the removed burners.
Greg M.
Greg M. Checked in
Removed the existing burner assembly from the gas furnace and replaced all five burners, with rust and discoloration observed on the burner tray and brackets. Reinstalled the burner assembly with the igniter and flame sensor hardware, reconnected the wiring and gas line, and disposed of the removed burners.
Ballwin, MO 63021
Inspected and evaluated the existing main electrical panel, identifying it as a vintage Federal Pacific unit with aged breakers, an incomplete circuit directory, and visible wear, which is a recognized safety concern. Documented the panel's condition, nameplate data, and breaker configuration with photographs, and assessed the system for replacement with a new panel to bring the service up to current code and safety standards.
Inspected and evaluated the existing main electrical panel, identifying it as a vintage Federal Pacific unit with aged breakers, an incomplete circuit directory, and visible wear, which is a recognized safety concern. Documented the panel's condition, nameplate data, and breaker configuration with photographs, and assessed the system for replacement with a new panel to bring the service up to current code and safety standards.
David Y.
David Y. Checked in
Inspected and evaluated the existing main electrical panel, identifying it as a vintage Federal Pacific unit with aged breakers, an incomplete circuit directory, and visible wear, which is a recognized safety concern. Documented the panel's condition, nameplate data, and breaker configuration with photographs, and assessed the system for replacement with a new panel to bring the service up to current code and safety standards.
Ballwin, MO 63011
Replaced the failed heat exchanger on the Rheem high-efficiency gas furnace after the original replacement part arrived damaged and a new unit was sourced. Removed the front access panel, disconnected the burner assembly, inducer, and associated wiring and gas connections, then installed the new heat exchanger and reassembled the combustion compartment. Verified proper burner ignition, flame characteristics, venting, and condensate drainage, and confirmed the system was operating correctly.
Replaced the failed heat exchanger on the Rheem high-efficiency gas furnace after the original replacement part arrived damaged and a new unit was sourced. Removed the front access panel, disconnected the burner assembly, inducer, and associated wiring and gas connections, then installed the new heat exchanger and reassembled the combustion compartment. Verified proper burner ignition, flame characteristics, venting, and condensate drainage, and confirmed the system was operating correctly.
11 M.
11 M. Checked in
Replaced the failed heat exchanger on the Rheem high-efficiency gas furnace after the original replacement part arrived damaged and a new unit was sourced. Removed the front access panel, disconnected the burner assembly, inducer, and associated wiring and gas connections, then installed the new heat exchanger and reassembled the combustion compartment. Verified proper burner ignition, flame characteristics, venting, and condensate drainage, and confirmed the system was operating correctly.
Ballwin, MO 63011
Installed a new 50-gallon tall gas tank-style water heater, connecting it with new soldered copper supply and outlet piping, shutoff valves, and a ceiling-mounted expansion tank, and routing the flue to the existing vent. Completed the installation with clean, secure connections and verified no visible leaks or damage at the finished work area.
Installed a new 50-gallon tall gas tank-style water heater, connecting it with new soldered copper supply and outlet piping, shutoff valves, and a ceiling-mounted expansion tank, and routing the flue to the existing vent. Completed the installation with clean, secure connections and verified no visible leaks or damage at the finished work area.
Bob S.
Bob S. Checked in
Installed a new 50-gallon tall gas tank-style water heater, connecting it with new soldered copper supply and outlet piping, shutoff valves, and a ceiling-mounted expansion tank, and routing the flue to the existing vent. Completed the installation with clean, secure connections and verified no visible leaks or damage at the finished work area.
Ballwin, MO 63011
Performed a heating tune-up on a gas furnace over 10 years old, inspecting the burner assembly, manifold, gas valve, inducer motor, and wiring connections. Noted surface rust and discoloration along the burner rail and manifold area, and used a borescope to inspect the flue/vent piping, which revealed rust spotting and mineral scale buildup at the pipe joint. Recommend monitoring the burners and venting for further corrosion and having the flue system evaluated for cleaning or replacement.
Performed a heating tune-up on a gas furnace over 10 years old, inspecting the burner assembly, manifold, gas valve, inducer motor, and wiring connections. Noted surface rust and discoloration along the burner rail and manifold area, and used a borescope to inspect the flue/vent piping, which revealed rust spotting and mineral scale buildup at the pipe joint. Recommend monitoring the burners and venting for further corrosion and having the flue system evaluated for cleaning or replacement.
Brandon F.
Brandon F. Checked in
Performed a heating tune-up on a gas furnace over 10 years old, inspecting the burner assembly, manifold, gas valve, inducer motor, and wiring connections. Noted surface rust and discoloration along the burner rail and manifold area, and used a borescope to inspect the flue/vent piping, which revealed rust spotting and mineral scale buildup at the pipe joint. Recommend monitoring the burners and venting for further corrosion and having the flue system evaluated for cleaning or replacement.
Ballwin, MO 63011
Performed heating tune-ups on two 20+ year-old furnaces and two humidifiers, inspecting the blower assembly, wiring connections, and cabinet interiors and cleaning accumulated dust and debris. Inspected heat exchangers with a camera, noting soot buildup and rust staining on the tubes, and verified safe, proper operation of each system.
Performed heating tune-ups on two 20+ year-old furnaces and two humidifiers, inspecting the blower assembly, wiring connections, and cabinet interiors and cleaning accumulated dust and debris. Inspected heat exchangers with a camera, noting soot buildup and rust staining on the tubes, and verified safe, proper operation of each system.
Robert P.
Robert P. Checked in
Performed heating tune-ups on two 20+ year-old furnaces and two humidifiers, inspecting the blower assembly, wiring connections, and cabinet interiors and cleaning accumulated dust and debris. Inspected heat exchangers with a camera, noting soot buildup and rust staining on the tubes, and verified safe, proper operation of each system.
Ballwin, MO 63011
Performed a heating tune-up on one unit, including inspection of the galvanized supply ductwork and connections, with no signs of damage, corrosion, or frost noted. Inspected the media air cleaner and found the pleated filter heavily loaded with dust and debris, indicating it is due for replacement. Verified the Aprilaire control unit is operational with its display and indicator lights functioning.
Performed a heating tune-up on one unit, including inspection of the galvanized supply ductwork and connections, with no signs of damage, corrosion, or frost noted. Inspected the media air cleaner and found the pleated filter heavily loaded with dust and debris, indicating it is due for replacement. Verified the Aprilaire control unit is operational with its display and indicator lights functioning.
Travis A.
Travis A. Checked in
Performed a heating tune-up on one unit, including inspection of the galvanized supply ductwork and connections, with no signs of damage, corrosion, or frost noted. Inspected the media air cleaner and found the pleated filter heavily loaded with dust and debris, indicating it is due for replacement. Verified the Aprilaire control unit is operational with its display and indicator lights functioning.
Ballwin, MO 63011
Performed heating tune-ups on two 7-year-old Lennox gas furnaces, inspecting the inducer motor, pressure switch, gas valve and piping, wiring harness, and control components. Both units were found clean and in normal operating condition with no signs of rust, damage, or leaks, and the associated ductwork and refrigerant line components were checked for proper condition.
Performed heating tune-ups on two 7-year-old Lennox gas furnaces, inspecting the inducer motor, pressure switch, gas valve and piping, wiring harness, and control components. Both units were found clean and in normal operating condition with no signs of rust, damage, or leaks, and the associated ductwork and refrigerant line components were checked for proper condition.
22 W.
22 W. Checked in
Performed heating tune-ups on two 7-year-old Lennox gas furnaces, inspecting the inducer motor, pressure switch, gas valve and piping, wiring harness, and control components. Both units were found clean and in normal operating condition with no signs of rust, damage, or leaks, and the associated ductwork and refrigerant line components were checked for proper condition.
Ballwin, MO 63021
Investigated recurring nuisance tripping on multiple 15 AMP AFCI/GFCI-type breakers (yellow test button) at the basement main panel, inspecting the service entrance, meter base, and panel interior for loose terminations, overheating, or damaged conductors. Tested affected circuits, verified breaker operation, and restored normal service with no visible signs of damage, corrosion, or overload at the panel or meter enclosure.
Investigated recurring nuisance tripping on multiple 15 AMP AFCI/GFCI-type breakers (yellow test button) at the basement main panel, inspecting the service entrance, meter base, and panel interior for loose terminations, overheating, or damaged conductors. Tested affected circuits, verified breaker operation, and restored normal service with no visible signs of damage, corrosion, or overload at the panel or meter enclosure.
David Y.
David Y. Checked in
Investigated recurring nuisance tripping on multiple 15 AMP AFCI/GFCI-type breakers (yellow test button) at the basement main panel, inspecting the service entrance, meter base, and panel interior for loose terminations, overheating, or damaged conductors. Tested affected circuits, verified breaker operation, and restored normal service with no visible signs of damage, corrosion, or overload at the panel or meter enclosure.
Ballwin, MO 63011
What To Expect

Discover the Difference

100% Satisfaction Guaranteed

Over 100 Vans on The Road, Ready to Offer Same-Day Service

Over 3,000 5-Star Reviews

Free Estimates

Highly Trained Techs With Over 35 Years Of Experience

Commitment to Community

100% Satisfaction Guaranteed

Over 100 Vans on The Road, Ready to Offer Same-Day Service

Over 3,000 5-Star Reviews

Free Estimates

Highly Trained Techs With Over 35 Years Of Experience

Commitment to Community

Truck Image
Join the Classic Aire Care Membership Program

Save on Service & Enjoy Peace of Mind

  • Priority customer status
  • Discounts on repair services
  • Comprehensive maintenance & tune-ups
  • No overtime charges
  • Extended equipment life