Call Today (314) 200-1211 Schedule Service

HVAC, Plumbing & Electrical Services in Lake St. Louis, MO

 

Lake St. Louis Service Overview

  • Heating & Cooling: Furnace repair, AC diagnostics, replacements, maintenance, heat pumps, ductless systems, mini-splits, boilers, and geothermal options.

  • Plumbing & Electrical: Leak repairs, fixtures, water heaters, sewer service, gas piping, electrical troubleshooting, panel upgrades, generators, wiring, lighting, and EV charging.

  • Indoor Air Quality: Air purification, HVAC air cleaners, humidification, and dehumidification for different levels and seasonal conditions.

 

Lake St. Louis developed around something most St. Charles County communities do not have at their center: the lake itself. From established homes near Lake Saint Louis and Lake Sainte Louise to development extending toward I-64 and the surrounding 63367 area, local properties range from older lake-community homes to larger, multi-level houses built during later periods of growth. Classic Aire Care provides heating, air conditioning, plumbing, electrical, and indoor air quality service throughout Lake St. Louis, with emergency after-hours help available when a problem cannot wait. Call (314) 200-1211 or schedule your service online today.

“The crew was very courteous and professional. They were super helpful and knowledgeable about any and all questions that I asked. Overall a great experience.”
— Ronnie R

Looking for HVAC Company near Lake St. Louis, MO? Contact Classic Aire Care online or call us at (314) 200-1211 today.

Technician repairing air conditioning unit in Lake Saint Louis

 

Lake St. Louis Homes Can Change From One Floor to the Next

Lake St. Louis was developed as a planned residential community, and many local homes reflect decades of expansion and changing expectations. Properties around the established lake areas can have completely different layouts from homes built during later growth toward I-64, while finished basements, upper floors, additions, and remodeled spaces can further change how the original mechanical systems need to perform.

That creates an important distinction for home service. A comfortable main floor does not guarantee the third floor is cooling correctly, and a finished basement may introduce plumbing, humidity, and heating needs that were never part of the original design. Classic Aire Care looks at the system in the context of the whole property rather than treating every 63367 home the same way.

For home service throughout Lake St. Louis, call Classic Aire Care at (314) 200-1211.

 

Common Lake St. Louis Home Challenges

Problem: An upper floor remains uncomfortable even though the main floor reaches the thermostat setting.

Solution: HVAC service can evaluate equipment performance, airflow, duct design, heat gain, zoning, and other factors before determining whether the entire system needs replacement.


Problem: A finished basement or lower level develops moisture concerns while other areas of the home have different humidity conditions.

Solution: Whole-home humidity management, including dehumidification or humidification, can address seasonal moisture and dryness through the HVAC system.


Problem: A remodeled or finished area adds electrical loads that the original home wiring was not designed to support.

Solution: Electrical service can evaluate panel capacity, existing circuits, wiring, and the requirements of new equipment before additional loads are installed.


Problem: A plumbing problem upstairs sends water into finished spaces below, or a remodeled area develops recurring plumbing issues.

Solution: Plumbing service can trace leaks between floors and evaluate fixtures, drains, water heaters, sewer connections, and plumbing additions based on the home’s current layout.

 

Furnace Repair & Heating Services for Lake St. Louis Homes

Multi-level houses can make heating problems obvious once temperatures fall. Warm air naturally moves upward, but duct layout, thermostat location, equipment performance, additions, and finished spaces can still leave certain areas uncomfortable. In established Lake St. Louis homes that have already gone through furnace replacements, newer equipment may also be working with portions of the original duct system.

Heating services for Lake St. Louis include:

A furnace should do more than satisfy the thermostat closest to it. Our technicians can evaluate equipment operation and heat distribution when upper floors, finished lower levels, or distant rooms are not keeping pace.

 

Electrical Services for Lake St. Louis Homes That Keep Adding More

The electrical needs of a Lake St. Louis home can change significantly over several decades. Finished basements, remodeled kitchens, outdoor entertaining spaces, home offices, additional HVAC equipment, and EVs can all add loads that were not anticipated when an older property was first wired. Lake living can also make dependable backup power valuable when severe Missouri weather interrupts electrical service.

Electrical services for Lake St. Louis include:

Adding a third-floor HVAC unit, EV charger, or other major equipment should begin with the electrical system supplying it. Our electricians can evaluate panel capacity, circuits, and wiring before determining what the new load requires.

Schedule Your Service Today!

Plumbing Services From Upper Floors to Lake St. Louis Basements

Multi-story homes create their own plumbing realities. A failed fixture or supply connection upstairs can send water through finished spaces below, while a basement plumbing problem may affect rooms homeowners use every day. Homes that have been remodeled over the years can also contain plumbing installed during several different periods.

Plumbing services for Lake St. Louis include:

Water damage can travel before becoming visible, especially in a multi-level property. Our plumbers work to trace the source so the repair addresses where the leak started rather than only where the water appeared.

 

AC Repair & Cooling for Lake St. Louis Multi-Level Living

Summer cooling can become complicated when a home has three floors, large windows, finished lower levels, or rooms exposed differently to afternoon sun. Lake St. Louis homeowners may find that the main level feels comfortable while an upper floor stays several degrees warmer. Some properties solve that challenge with separate equipment or ductless systems dedicated to specific areas.

Cooling services for Lake St. Louis include:

A third floor that refuses to cool does not automatically mean the entire central system needs replacement. Equipment capacity, airflow, duct design, heat gain, and zoning all deserve consideration before deciding how to correct the problem.

“I’ve had Classic Aire put in a 3rd floor unit years ago and they did a fantastic job with a high quality unit. So they had a good reputation walking in. Yesterday John really helped us out with a small disaster we had in the basement with our 29+ year old AC. John diagnosed and resolved the problem quickly and economically. He then took great care in explaining how to prevent again. We were so impressed we set up a bi annual service contract”
— Stephen P

Indoor Air Quality Services Around Lake St. Louis

Living around two lakes gives Lake St. Louis a geographic feature that most nearby communities do not share. Missouri already brings substantial summer humidity, and lower levels can develop their own moisture concerns during warm, wet stretches. Once winter heating begins, the same house can swing toward excessively dry indoor air.

Indoor air quality services for Lake St. Louis include:

Humidity can vary between the basement, main floor, and upper levels of the same house. Whole-home equipment can address those conditions through the HVAC system rather than relying on portable units scattered around the property.

 

When Finished Space Expands, Home Systems Have to Follow

Finishing a basement, converting an upper floor, or building an addition changes more than the amount of usable space in a Lake St. Louis home. The new area may need additional heating and cooling capacity, dedicated electrical circuits, new plumbing, better humidity management, or a combination of all four. What began as a remodeling project can quickly change the demands placed on systems originally designed for a smaller floorplan.

Classic Aire Care provides heating, cooling, plumbing, electrical, and indoor air quality expertise under one company. That makes it easier to evaluate how a newly finished or remodeled area affects the rest of the property instead of looking at each system in isolation.

“Brian provided excellent service. He was prompt, courteous and professional. He is exactly what we expect from Classic Aire Care.”
— jim e

Comfort on Every Level of Your Lake St. Louis Home

The basement, main floor, and upper levels of a Lake St. Louis home can each place different demands on the systems behind the walls. Finished lower levels need moisture control, upper floors can challenge cooling performance, remodeled areas increase electrical and plumbing demand, and older equipment may eventually be asked to serve considerably more house than it once did.

Classic Aire Care provides air conditioning, heating, plumbing, electrical, and indoor air quality service throughout Lake St. Louis and 63367. Whether your home is near the established lake community

FAQs for Lake St. Louis Homeowners

Classic Aire Care provides furnace diagnostics and repair, emergency heating, heating replacement, new furnace installation, boiler service, heat pump care, geothermal options, AC diagnostics, cooling response, central AC replacement, preventive maintenance, ductless cooling, mini-split service, and other HVAC solutions throughout Lake St. Louis and 63367.

Yes. Upper-floor comfort can be affected by equipment capacity, airflow, duct design, heat gain, zoning, and room layout. Service can evaluate these factors before determining whether the issue requires repair, ductless cooling, additional equipment, or another solution.

Plumbing services include emergency leak response, toilet and fixture repairs, plumbing additions, drain clearing, water heaters, sewer troubleshooting, leak detection, gas piping, backflow protection, disposal repairs, and commercial plumbing around Lake St. Louis.

Yes. Electrical services include troubleshooting, new circuits, backup generators, surge protection, outlets and fans, rewiring, panel upgrades, lighting, electrical inspections, and EV charging throughout 63367.

Yes. Indoor air quality services include air purification, HVAC air cleaners, humidifiers, and dehumidification. These options can address different conditions between basements, main floors, and upper levels as seasonal humidity and dryness change.

 

Recent Jobs and Reviews in Ballwin, MO

Ballwin, MO at a glance

Classic Aire Care has completed 20 jobs in Ballwin, MO in May 2026.

The most recent job was on May 8, 2026.

Classic Aire Care has completed 512 jobs in Ballwin, MO in the last 12 months.

Job Locations and Reviews

Responded to report of furnace making unusual noise. Performed comprehensive Cooling U10 maintenance inspection on 5-year-old unit located in basement. Conducted temperature diagnostics using digital thermometer, recording 71°F reading at ductwork/insulation area. Performed electrical testing with multimeter to verify system voltage and amperage readings, confirming proper electrical function at 0.5 reading. System operational with no abnormal noises detected at time of service.
Responded to report of furnace making unusual noise. Performed comprehensive Cooling U10 maintenance inspection on 5-year-old unit located in basement. Conducted temperature diagnostics using digital thermometer, recording 71°F reading at ductwork/insulation area. Performed electrical testing with multimeter to verify system voltage and amperage readings, confirming proper electrical function at 0.5 reading. System operational with no abnormal noises detected at time of service.
Greg M.
Greg M. Checked in
Responded to report of furnace making unusual noise. Performed comprehensive Cooling U10 maintenance inspection on 5-year-old unit located in basement. Conducted temperature diagnostics using digital thermometer, recording 71°F reading at ductwork/insulation area. Performed electrical testing with multimeter to verify system voltage and amperage readings, confirming proper electrical function at 0.5 reading. System operational with no abnormal noises detected at time of service.
Ballwin, MO 63021
Completed cooling system tune-up on single residential unit located in side yard. Performed comprehensive maintenance including inspection of control board, electrical connections, and blower assembly; replaced air filter; verified proper operation of all system components. Unit is under 10 years old and all components found to be in good working condition with no issues identified.
Completed cooling system tune-up on single residential unit located in side yard. Performed comprehensive maintenance including inspection of control board, electrical connections, and blower assembly; replaced air filter; verified proper operation of all system components. Unit is under 10 years old and all components found to be in good working condition with no issues identified.
Mitchell L.
Mitchell L. Checked in
Completed cooling system tune-up on single residential unit located in side yard. Performed comprehensive maintenance including inspection of control board, electrical connections, and blower assembly; replaced air filter; verified proper operation of all system components. Unit is under 10 years old and all components found to be in good working condition with no issues identified.
Ballwin, MO 63011
Replaced recessed fluorescent light fixtures in main bathroom area as requested. Customer supplied new fixtures for installation. Removed existing fixtures, installed flexible metallic conduit for electrical connections, and mounted replacement fluorescent lighting units to ceiling structure in accordance with electrical code requirements.
Replaced recessed fluorescent light fixtures in main bathroom area as requested. Customer supplied new fixtures for installation. Removed existing fixtures, installed flexible metallic conduit for electrical connections, and mounted replacement fluorescent lighting units to ceiling structure in accordance with electrical code requirements.
David Y.
David Y. Checked in
Replaced recessed fluorescent light fixtures in main bathroom area as requested. Customer supplied new fixtures for installation. Removed existing fixtures, installed flexible metallic conduit for electrical connections, and mounted replacement fluorescent lighting units to ceiling structure in accordance with electrical code requirements.
Ballwin, MO 63021
Completed warranty replacement of collector box assembly on Lennox HVAC system. Removed defective condensate collection component and installed new unit, ensuring proper drainage connections and secure mounting to equipment base. System tested and verified operational with heating and cooling functions confirmed working properly.
Completed warranty replacement of collector box assembly on Lennox HVAC system. Removed defective condensate collection component and installed new unit, ensuring proper drainage connections and secure mounting to equipment base. System tested and verified operational with heating and cooling functions confirmed working properly.
Chase M.
Chase M. Checked in
Completed warranty replacement of collector box assembly on Lennox HVAC system. Removed defective condensate collection component and installed new unit, ensuring proper drainage connections and secure mounting to equipment base. System tested and verified operational with heating and cooling functions confirmed working properly.
Ballwin, MO 63011
Completed cooling system tune-up on a single outdoor condenser unit over 10 years old located in side yard. Performed comprehensive system inspection including internal control board, electrical connections, capacitor, and blower motor components. Cleaned heavily soiled condenser coil which showed significant dirt and debris accumulation between fins. Verified all electrical connections secure, tested capacitor operation, and confirmed proper system functionality upon completion.
Completed cooling system tune-up on a single outdoor condenser unit over 10 years old located in side yard. Performed comprehensive system inspection including internal control board, electrical connections, capacitor, and blower motor components. Cleaned heavily soiled condenser coil which showed significant dirt and debris accumulation between fins. Verified all electrical connections secure, tested capacitor operation, and confirmed proper system functionality upon completion.
Eli H.
Eli H. Checked in
Completed cooling system tune-up on a single outdoor condenser unit over 10 years old located in side yard. Performed comprehensive system inspection including internal control board, electrical connections, capacitor, and blower motor components. Cleaned heavily soiled condenser coil which showed significant dirt and debris accumulation between fins. Verified all electrical connections secure, tested capacitor operation, and confirmed proper system functionality upon completion.
Ballwin, MO 63021
Completed comprehensive cooling system tune-up on single outdoor condensing unit. Performed standard maintenance protocol including inspection of condenser coil which showed moderate mineral deposits and debris accumulation on fins, checked refrigerant lines, verified electrical connections, and tested system operation. Unit operational and running within normal parameters upon completion.
Completed comprehensive cooling system tune-up on single outdoor condensing unit. Performed standard maintenance protocol including inspection of condenser coil which showed moderate mineral deposits and debris accumulation on fins, checked refrigerant lines, verified electrical connections, and tested system operation. Unit operational and running within normal parameters upon completion.
Eric C.
Eric C. Checked in
Completed comprehensive cooling system tune-up on single outdoor condensing unit. Performed standard maintenance protocol including inspection of condenser coil which showed moderate mineral deposits and debris accumulation on fins, checked refrigerant lines, verified electrical connections, and tested system operation. Unit operational and running within normal parameters upon completion.
Ballwin, MO 63011
Completed comprehensive cooling tune-up on 2-year-old outdoor AC condenser unit. Performed standard maintenance protocol including inspection of electrical components, circuit boards, and control modules—all found to be in good working condition with no signs of corrosion or damage. Cleaned exterior surfaces and discussed filter replacement options with homeowner per their interest.
Completed comprehensive cooling tune-up on 2-year-old outdoor AC condenser unit. Performed standard maintenance protocol including inspection of electrical components, circuit boards, and control modules—all found to be in good working condition with no signs of corrosion or damage. Cleaned exterior surfaces and discussed filter replacement options with homeowner per their interest.
Travis A.
Travis A. Checked in
Completed comprehensive cooling tune-up on 2-year-old outdoor AC condenser unit. Performed standard maintenance protocol including inspection of electrical components, circuit boards, and control modules—all found to be in good working condition with no signs of corrosion or damage. Cleaned exterior surfaces and discussed filter replacement options with homeowner per their interest.
Ballwin, MO 63021
Completed comprehensive air conditioning tune-up service on single outdoor unit for Home Depot customer. Performed standard maintenance protocol including inspection of air filter assembly, which showed moderate dust and debris accumulation in mesh screens, and examined evaporator coil condition. All system components were evaluated and photographed for service documentation, with unit confirmed operational upon completion.
Completed comprehensive air conditioning tune-up service on single outdoor unit for Home Depot customer. Performed standard maintenance protocol including inspection of air filter assembly, which showed moderate dust and debris accumulation in mesh screens, and examined evaporator coil condition. All system components were evaluated and photographed for service documentation, with unit confirmed operational upon completion.
Brandon F.
Brandon F. Checked in
Completed comprehensive air conditioning tune-up service on single outdoor unit for Home Depot customer. Performed standard maintenance protocol including inspection of air filter assembly, which showed moderate dust and debris accumulation in mesh screens, and examined evaporator coil condition. All system components were evaluated and photographed for service documentation, with unit confirmed operational upon completion.
Ballwin, MO 63011
Responded to callback for blank Lennox iComfort thermostat on recently installed system less than one year old. Inspected attic-mounted air handler and verified proper power supply to unit and thermostat wiring connections. Documented equipment installation including Lennox air handler with all specification labels intact and proper mounting on structural framing. System restored to full operational status with thermostat display functioning normally.
Responded to callback for blank Lennox iComfort thermostat on recently installed system less than one year old. Inspected attic-mounted air handler and verified proper power supply to unit and thermostat wiring connections. Documented equipment installation including Lennox air handler with all specification labels intact and proper mounting on structural framing. System restored to full operational status with thermostat display functioning normally.
Jack F.
Jack F. Checked in
Responded to callback for blank Lennox iComfort thermostat on recently installed system less than one year old. Inspected attic-mounted air handler and verified proper power supply to unit and thermostat wiring connections. Documented equipment installation including Lennox air handler with all specification labels intact and proper mounting on structural framing. System restored to full operational status with thermostat display functioning normally.
Ballwin, MO 63021
Completed comprehensive tune-up maintenance on a 23-year-old Lennox HVAC system with outdoor condenser unit. Performed standard preventive maintenance procedures including inspection of condenser coil fins, verification of refrigerant levels, examination of electrical connections, and assessment of overall system operation. Condenser coils found in satisfactory condition with minimal debris accumulation; unit operational and functioning within normal parameters at time of service completion.
Completed comprehensive tune-up maintenance on a 23-year-old Lennox HVAC system with outdoor condenser unit. Performed standard preventive maintenance procedures including inspection of condenser coil fins, verification of refrigerant levels, examination of electrical connections, and assessment of overall system operation. Condenser coils found in satisfactory condition with minimal debris accumulation; unit operational and functioning within normal parameters at time of service completion.
Alex M.
Alex M. Checked in
Completed comprehensive tune-up maintenance on a 23-year-old Lennox HVAC system with outdoor condenser unit. Performed standard preventive maintenance procedures including inspection of condenser coil fins, verification of refrigerant levels, examination of electrical connections, and assessment of overall system operation. Condenser coils found in satisfactory condition with minimal debris accumulation; unit operational and functioning within normal parameters at time of service completion.
Ballwin, MO 63011
Ballwin, MO - Responded to no heat call on 2-year-old Lennox furnace following recent rewiring work. Upon inspection, discovered improper wiring connections at the control board that were preventing the unit from initiating heating cycle. Corrected all low-voltage wiring connections, verified proper wire routing and terminal assignments, and ensured secure connections at all junction points. Tested system operation through complete heating cycle and confirmed furnace is now producing heat properly.
Chase M.
Chase M. Checked in
Responded to no heat call on 2-year-old Lennox furnace following recent rewiring work. Upon inspection, discovered improper wiring connections at the control board that were preventing the unit from initiating heating cycle. Corrected all low-voltage wiring connections, verified proper wire routing and terminal assignments, and ensured secure connections at all junction points. Tested system operation through complete heating cycle and confirmed furnace is now producing heat properly.
Ballwin, MO 63021
Ballwin, MO - Responded to callback for continuously running blower fan following earlier repair completion. Upon arrival, verified blower motor was running non-stop and would not cycle off with thermostat. Diagnosed issue as incorrect DIP switch configuration on control board. Referenced manufacturer technical documentation and adjusted LOW GW DIP switch settings to proper configuration per equipment specifications. Cycled system through multiple heating and cooling calls to confirm blower now operates correctly with proper on/off cycling. System restored to normal operation with blower responding appropriately to thermostat commands.
Chase M.
Chase M. Checked in
Responded to callback for continuously running blower fan following earlier repair completion. Upon arrival, verified blower motor was running non-stop and would not cycle off with thermostat. Diagnosed issue as incorrect DIP switch configuration on control board. Referenced manufacturer technical documentation and adjusted LOW GW DIP switch settings to proper configuration per equipment specifications. Cycled system through multiple heating and cooling calls to confirm blower now operates correctly with proper on/off cycling. System restored to normal operation with blower responding appropriately to thermostat commands.
Ballwin, MO 63011
Completed comprehensive cooling system tune-up on basement-located O10 unit. Performed standard maintenance protocol including inspection of capacitor, electrical connections, control boards, and all associated wiring components. All systems tested and verified operational, with photographic documentation captured of internal components showing normal wear consistent with unit age.
Completed comprehensive cooling system tune-up on basement-located O10 unit. Performed standard maintenance protocol including inspection of capacitor, electrical connections, control boards, and all associated wiring components. All systems tested and verified operational, with photographic documentation captured of internal components showing normal wear consistent with unit age.
Travis A.
Travis A. Checked in
Completed comprehensive cooling system tune-up on basement-located O10 unit. Performed standard maintenance protocol including inspection of capacitor, electrical connections, control boards, and all associated wiring components. All systems tested and verified operational, with photographic documentation captured of internal components showing normal wear consistent with unit age.
Ballwin, MO 63011
Completed comprehensive cooling maintenance on 14-year-old Trane system. Performed AC tune-up including inspection of blower motor assembly, capacitor, and electrical connections; all wiring and components found in proper working order. System tested and confirmed operational with no issues identified.
Completed comprehensive cooling maintenance on 14-year-old Trane system. Performed AC tune-up including inspection of blower motor assembly, capacitor, and electrical connections; all wiring and components found in proper working order. System tested and confirmed operational with no issues identified.
Travis A.
Travis A. Checked in
Completed comprehensive cooling maintenance on 14-year-old Trane system. Performed AC tune-up including inspection of blower motor assembly, capacitor, and electrical connections; all wiring and components found in proper working order. System tested and confirmed operational with no issues identified.
Ballwin, MO 63021
Completed comprehensive cooling tune-up maintenance on two outdoor AC units. Performed standard diagnostic testing including temperature differential measurements showing 100.3°F readings and amp draw verification at 44.9 amps on condenser fan motor, confirming both systems operating within normal parameters.
Completed comprehensive cooling tune-up maintenance on two outdoor AC units. Performed standard diagnostic testing including temperature differential measurements showing 100.3°F readings and amp draw verification at 44.9 amps on condenser fan motor, confirming both systems operating within normal parameters.
Chase M.
Chase M. Checked in
Completed comprehensive cooling tune-up maintenance on two outdoor AC units. Performed standard diagnostic testing including temperature differential measurements showing 100.3°F readings and amp draw verification at 44.9 amps on condenser fan motor, confirming both systems operating within normal parameters.
Ballwin, MO 63021
Completed comprehensive cooling season tune-up on a Daikin ground-level condensing unit less than 10 years old located in side yard. Performed full system inspection including electrical control board evaluation, verified proper wiring connections and relay operation, inspected refrigerant line connections and fittings for integrity, and documented equipment nameplate data and operational specifications. All components found operating within normal parameters with system ready for cooling season operation.
Completed comprehensive cooling season tune-up on a Daikin ground-level condensing unit less than 10 years old located in side yard. Performed full system inspection including electrical control board evaluation, verified proper wiring connections and relay operation, inspected refrigerant line connections and fittings for integrity, and documented equipment nameplate data and operational specifications. All components found operating within normal parameters with system ready for cooling season operation.
Frank H.
Frank H. Checked in
Completed comprehensive cooling season tune-up on a Daikin ground-level condensing unit less than 10 years old located in side yard. Performed full system inspection including electrical control board evaluation, verified proper wiring connections and relay operation, inspected refrigerant line connections and fittings for integrity, and documented equipment nameplate data and operational specifications. All components found operating within normal parameters with system ready for cooling season operation.
Ballwin, MO 63021
Ballwin, MO - Responded to no heat condition on HVAC system. Replaced defective Daikin control board with new unit as previously diagnosed. Verified all wire harness connections to circuit board including multi-colored low voltage wiring and terminal block connections. System tested and restored to proper heating operation. Retained original control board per customer request.
Brandon F.
Brandon F. Checked in
Responded to no heat condition on HVAC system. Replaced defective Daikin control board with new unit as previously diagnosed. Verified all wire harness connections to circuit board including multi-colored low voltage wiring and terminal block connections. System tested and restored to proper heating operation. Retained original control board per customer request.
Ballwin, MO 63011
Completed annual cooling system tune-up and preventive maintenance on residential HVAC unit. Performed comprehensive inspection of condenser coils, verified electrical connections and amperage draws using digital clamp meter, and confirmed proper airflow through supply registers. All components operating within normal parameters with no deficiencies noted.
Completed annual cooling system tune-up and preventive maintenance on residential HVAC unit. Performed comprehensive inspection of condenser coils, verified electrical connections and amperage draws using digital clamp meter, and confirmed proper airflow through supply registers. All components operating within normal parameters with no deficiencies noted.
Brandon F.
Brandon F. Checked in
Completed annual cooling system tune-up and preventive maintenance on residential HVAC unit. Performed comprehensive inspection of condenser coils, verified electrical connections and amperage draws using digital clamp meter, and confirmed proper airflow through supply registers. All components operating within normal parameters with no deficiencies noted.
Ballwin, MO 63021
Replaced existing humidifier with AprilAire 600M whole-home humidifier unit on HVAC system. Fabricated and installed 10x10 metal patch on ductwork plenum to accommodate new equipment mounting. Removed and disposed of old humidifier unit, connected water supply lines, and verified system operation with heating and cooling functions.
Replaced existing humidifier with AprilAire 600M whole-home humidifier unit on HVAC system. Fabricated and installed 10x10 metal patch on ductwork plenum to accommodate new equipment mounting. Removed and disposed of old humidifier unit, connected water supply lines, and verified system operation with heating and cooling functions.
41 T.
41 T. Checked in
Replaced existing humidifier with AprilAire 600M whole-home humidifier unit on HVAC system. Fabricated and installed 10x10 metal patch on ductwork plenum to accommodate new equipment mounting. Removed and disposed of old humidifier unit, connected water supply lines, and verified system operation with heating and cooling functions.
Ballwin, MO 63021
Responded to recall for HVAC system blowing cold air when heating mode selected. Inspected thermostat wiring and heat pump control board connections in attic space. Found improper wire terminations at reversing valve solenoid and control board causing system to remain in cooling mode regardless of thermostat setting. Corrected wire connections, secured all terminations properly, and verified proper operation of reversing valve. System now heating correctly per thermostat commands.
Responded to recall for HVAC system blowing cold air when heating mode selected. Inspected thermostat wiring and heat pump control board connections in attic space. Found improper wire terminations at reversing valve solenoid and control board causing system to remain in cooling mode regardless of thermostat setting. Corrected wire connections, secured all terminations properly, and verified proper operation of reversing valve. System now heating correctly per thermostat commands.
Frank H.
Frank H. Checked in
Responded to recall for HVAC system blowing cold air when heating mode selected. Inspected thermostat wiring and heat pump control board connections in attic space. Found improper wire terminations at reversing valve solenoid and control board causing system to remain in cooling mode regardless of thermostat setting. Corrected wire connections, secured all terminations properly, and verified proper operation of reversing valve. System now heating correctly per thermostat commands.
Ballwin, MO 63021
What To Expect

Discover the Difference

100% Satisfaction Guaranteed

Over 100 Vans on The Road, Ready to Offer Same-Day Service

Over 3,000 5-Star Reviews

Free Estimates

Highly Trained Techs With Over 35 Years Of Experience

Commitment to Community

100% Satisfaction Guaranteed

Over 100 Vans on The Road, Ready to Offer Same-Day Service

Over 3,000 5-Star Reviews

Free Estimates

Highly Trained Techs With Over 35 Years Of Experience

Commitment to Community

Truck Image
Join the Classic Aire Care Membership Program

Save on Service & Enjoy Peace of Mind

  • Priority customer status
  • Discounts on repair services
  • Comprehensive maintenance & tune-ups
  • No overtime charges
  • Extended equipment life