Complete HVAC & Plumbing Solutions for Weldon Spring, MO Homes

Completed heating maintenance tune-up on three furnace systems. Performed full combustion checks, inspected evaporator coils and heat exchangers, verified thermostat operation showing 76°F setpoint, and documented system conditions with interior ductwork and component photography.

Completed annual heating maintenance tune-up on 8-year-old Trane furnace system with integrated Aprilaire humidifier. Performed comprehensive inspection of all furnace components, verified proper operation of heating system, checked ductwork connections, and confirmed humidifier functionality. System operating within manufacturer specifications with no deficiencies noted.

Responded to no cooling call on 9-year-old Trane 4-ton unit (Model: TOHIIC 100RCWAUBB). Upon inspection, discovered failed control board with visible corrosion and deterioration on circuit components, including damaged capacitors and connector terminals. Replaced defective control board, verified all electrical connections, and tested system operation. Unit restored to full cooling capacity with all safety controls functioning properly.

Replaced existing chandelier in 2-story foyer with customer-supplied fixture at 19-foot ceiling height. Successfully installed new geometric pendant light with black metal wire cage design and white globe, securing all electrical connections and mounting hardware. Installation completed without complications.

Completed installation of hockey puck style water switch and REME HALO bulb replacement in HVAC system. Unit is now operational with new air purification component installed and powered, as evidenced by illuminated LED indicator. All old components were properly disposed of per service protocol.

Responded to cooling and humidity complaint on 2-year-old Lennox system. Upon inspection, accessed air handler compartment and verified equipment model and serial number documentation. System was not maintaining set temperature in affected zone, with elevated humidity levels present. Performed diagnostic evaluation of internal components and wiring connections within the air handler cabinet to identify root cause of inadequate cooling performance.

Completed scheduled cooling season tune-up on ground-level outdoor unit. Performed comprehensive system inspection including refrigerant line set examination, electrical connection verification, and condensate drain assessment. Inspected insulated refrigerant lines, junction box connections, and attic ductwork components to ensure proper operation and identify any maintenance concerns. All components found in satisfactory working condition with no immediate repairs required. System operating within normal parameters and ready for cooling season demand.

Responded to water leak complaint from basement HVAC unit. Upon arrival, inspected interior mechanical components and identified active leak originating from oxidized copper piping and brass valve assembly connections. Found deteriorated pipe fittings with visible corrosion and compromised seals at connection points near heat exchanger assembly. Documented existing conditions showing aged copper tubing with significant oxidation, refrigerant lines, and finned heat exchanger component. Advised customer of findings and recommended system shutdown to prevent further water damage until repairs could be completed.

Responded to service call for a 10-year-old ground-level air conditioning unit reportedly making unusual noises and struggling to maintain temperature. Performed diagnostic inspection and visual assessment of the outdoor condensing unit, documenting equipment specifications including R-410A refrigerant type and September 2013 manufacture date. Provided second opinion evaluation as requested, with unit left in fan-only mode per instructions pending further recommendations.

Responded to no cooling call on 15-year-old air conditioning system. Found outdoor condensing unit not operating while indoor furnace blower was running normally. Diagnosed and repaired electrical failure preventing compressor operation, restoring full cooling function to the system.

Completed comprehensive cooling system tune-up on a single residential unit located in side yard, less than 10 years old. Upon inspection, discovered significant dust and debris accumulation on condenser coil fins, which was restricting airflow and reducing system efficiency. Thoroughly cleaned condenser coil to restore optimal heat transfer and airflow capacity, performed standard maintenance checks, and verified system operation.

Responded to report of roof leak potentially affecting AC unit and causing exhaust issues. Upon inspection, identified that water intrusion was related to chimney flue and furnace flue penetrations in basement area rather than the air conditioning system itself. Documented both flue penetrations with photographic evidence showing metal ductwork passing through wooden surfaces with black flashing/sealant material. Advised customer to turn off unit temporarily and leave fan running while roof leak issue is addressed to prevent further water damage to HVAC components.

Completed comprehensive cooling maintenance on a 9-year-old air conditioning system found in proper working condition. Performed standard AC tune-up protocol including inspection of blower motor assembly, verification of motor shaft alignment, and examination of housing components for secure mounting and proper sealing. Inspected air filter which showed moderate dust and debris accumulation consistent with normal operation; filter condition documented photographically. All system components operating within normal parameters at time of service.

Responded to no cooling complaint on 14-year-old GeoComfort geothermal heat pump system. Upon arrival, confirmed air handler was operating and circulating air through ductwork, but system was not producing cool air. Performed diagnostic evaluation of ground source heat pump components. Inspected air handler unit located in mechanical room, checked refrigerant lines, and verified electrical connections. Documented equipment condition and installation environment showing age-related wear in utility space. System evaluation revealed cooling malfunction requiring further assessment of compressor operation and refrigerant circuit. Photographed equipment for service records showing air handler cabinet and copper refrigerant line connections in basement installation area with visible moisture exposure patterns on surrounding surfaces.

Responded to no cooling complaint on 2-year-old Goodman residential air conditioning system affecting entire home. Upon arrival, performed diagnostic assessment using digital multimeter to measure system temperatures and verify operational parameters. Inspected and evaluated air filter condition, which showed moderate dust accumulation in the pleated media. Checked system electrical readings and confirmed proper voltage supply. Measured supply air temperature at 51.15°F, indicating system was producing cool air at time of inspection. Verified airflow through filter housing and return air pathway. System found to be operating within normal parameters during service call. Documented findings with photos of diagnostic equipment readings and filter condition for service records.

Conducted comprehensive electrical assessment for new panel installation in residential property. Evaluated existing electrical panel configuration, circuit breaker arrangement, and wiring infrastructure to determine specifications for panel upgrade. Documented current system conditions including circuit distribution, wire gauges, and connection points to ensure proper sizing and code compliance for replacement panel installation.

Responded to no cooling complaint on 1-year-old ductless mini-split system located in sunroom. Upon inspection, found indoor wall-mounted air handler and outdoor condensing unit both operational but system not achieving desired temperature. Verified refrigerant charge, cleaned outdoor coil fins which showed minor debris accumulation, and confirmed proper airflow from indoor unit. System restored to normal cooling operation and tested successfully before departure.

# HVAC Service - No Cool Diagnostic Responded to service call for 8-year-old air handler system located in basement with reported issues of warm air discharge, inadequate temperature maintenance, and excessive operational noise. Upon arrival, customer had system running in fan-only mode with cooling disabled per pre-service instructions. Performed comprehensive diagnostic evaluation of the air handling unit and associated ductwork. Conducted visual inspection of the entire HVAC installation including the air handler cabinet, supply plenum connections, and metallic ductwork configuration. Examined control panel indicators and operational status lights on unit front panel. Assessed humidifier integration and connection points to main supply duct. Evaluated airflow characteristics through supply grilles and return air pathways. Inspected ductwork joints, elbow connections, and insulation integrity throughout the distribution system. Checked for proper clearances around equipment and ve

Responded to no cooling complaint on 3-year-old Lennox system. Upon arrival, verified system was running but not cooling adequately despite complete AC replacement performed last year. Conducted thorough diagnostic inspection of indoor and outdoor units. Inspected condensate drainage system and PVC piping configuration, noting proper installation of Charlotte Pipe components with electrical conduit routing through drain assembly. Verified furnace and air handler connections, checked all electrical terminations and control wiring. System evaluated for refrigerant charge, airflow restrictions, and thermostat operation. Identified and resolved cooling deficiency, restoring proper system operation and adequate cooling performance to residence.

Completed comprehensive cooling tune-up on 15-year-old residential AC unit located on side of home. Performed full system inspection including electrical connections, control board functionality, and refrigerant circuit evaluation. Replaced air filter with new 20x20 pleated media filter to ensure proper airflow and system efficiency.