Furnace Repair in Ballwin

When winter weather hits, the last thing you want is a furnace that isn’t working. When you need furnace repair in Ballwin, you need Classic Aire Care. Our licensed and certified technicians have the knowledge to quickly diagnose and repair the issue, giving your home back its warmth. If your furnace is on the fritz, call us at (314) 329-1943 or get a repair appointment online. 

Delays in Repair Could be Costly

When your furnace starts to fail, quick action could save you from more costly repairs and breakdowns. With so many intricate systems operating in sync with each other, one small issue with a component could quickly snowball into expensive furnace repair in Ballwin. That’s why it’s important to contact our team of expert HVAC technicians at the first sign of trouble. 

It may be tempting to put it off in the hope that it resolves itself. To many, opening the door to the furnace when there’s an issue is like Schrodinger’s Cat…as long as the door is closed, the problem doesn’t really exist. However, that problem becomes a reality when the furnace shuts down completely and your home is no longer getting the heat you need. 

Early signs of Furnace Repair in Ballwin

Though it may not always be the case, often your furnace will show signs that something is about to break or that there is an impending shutdown. Knowing what to look for and listen to can mean the difference between a small fix and a costly repair or breakdown. Let’s go over some of the signs that your furnace may soon need furnace repair in Ballwin:

Bad smells

When you first turn your furnace on, it’s common to smell the duct and debris being burned off. However, if your furnace has been running for a while and you start to smell unpleasant, unusual odors, chances are it’s your furnace telling you something is wrong. These odors could be:

• Something Burning: Your furnace has a series of belts that run the entire system. If these belts are misaligned or frayed, they may produce a burning smell. This is a sure sign of an impending breakdown and should be addressed with furnace repair in Ballwin as quickly as possible. 

• Rotten-Egg: If you have a gas furnace, it’s possible you could smell the all-too-familiar sign of a gas leak: rotten eggs. If you notice this, it’s important to shut your furnace off immediately and call an experienced technician. 

Crazy Sounds

Your furnace doesn’t operate quietly, and you eventually get used to what it sounds like when your furnace is running as it should. There are some early signs of failure, however, that come in the form of unusual sounds. If you hear any of these sounds, it’s time to call for furnace repair in Ballwin:

• Rattling: There are many connections within the complex components of your furnace, along with several nuts and bolts. Over time, through normal operation, these connections can loosen, causing rattling sounds. Sometimes, it’s as simple as loose ductwork, but other times, it could be a loose bolt in the blower system. Whatever the cause, call for furnace repair in Ballwin to prevent any further damage. 

• Squealing: Just as a burning smell could be from a loose or worn belt, it often presents alongside a high-pitched squeal. This could be a sign that a belt is about to slip. If that happens, severe damage could be done on the internal components and lead to unplanned replacement of the furnace. 
• Banging: This sound usually follows the rattle of loose connections. If you hear banging from inside your furnace space, chances are, something has happened within the blower motor. Shut the system off and call for furnace repair in Ballwin immediately. 

Poor Air Quality 

Poor air quality defines having issues breathing inside your home or noticing an extreme amount of dust and other air particles floating in the air. Having issues with the air inside your home is often indicative of a dirty or clogged air filter. These should be checked every month and replaced every 1-3 months, depending on the type of filters you use. 

Poor air quality could also be due to blocked vents and dirty registers. Registers are where the air is pulled through to your furnace and the vents are where the warm air enters back inside your home. If excessive dirt is inside your home, it could also be a sign of dirt and debris inside your furnace. It’s important to call for furnace repair in Ballwin if replacing the air filters doesn’t allow the air to clear up. 

Frequent Cycling

Frequent cycling describes your furnace turning on and off constantly without reaching your desired temperature. If this is happening, something is wrong either with your thermostat or inside your furnace, and it is a sign to call for furnace repair in Ballwin. Some causes of frequent cycling are:

• Miscalibrated thermostat: Your thermostat controls when your furnace turns on and tells it how warm it is to keep you home. If you are having issues with your thermostat, it can cause frequent cycling. 

• Furnace Overheating: Your furnace has safety features built in that help the furnace operate safely. One of these controls is if the furnace overheats, it will shut off on its own. If your furnace is overheating, chances are you have clogged air filters or another reason why airflow is hindered.

If your furnace is allowed to continue frequent, or short, cycling, it will lead to undue wear and tear, potentially causing expensive repairs and premature replacement. It’s important to call Classic Aire Care as soon as possible for furnace repair in Ballwin. 

Many homeowners trust Classic Aire Care with all of their furnace and HVAC needs. We have licensed and certified technicians with the experience to handle whatever your furnace throws at them. Call us today at (314) 329-1943 or get a repair appointment online. Don’t let a small problem turn into costly repairs–Call us at the first sign of trouble and ensure your furnace is ready to provide your family with warmth and comfort all winter long.