Plumbing, Furnace, & Air Conditioning Services in Ballwin, MO

Completed comprehensive cooling maintenance on 9-year-old AC system. Performed full system inspection including control board examination, electrical connections verification, and blower motor assessment. Installed new air filter with clean pleated media and confirmed all components operating within normal parameters. System tested and functioning properly with no issues identified.

Responded to intermittent thermostat operation on a 1-year-old system located in hallway. Upon inspection, discovered heavily soiled outdoor unit filter with significant dust accumulation and debris buildup affecting system performance. Cleaned and serviced outdoor unit components to restore proper airflow and system functionality.

Installed dedicated electrical circuit and new outlet for dishwasher connection. Ran new wiring from electrical panel through attic space to kitchen location, ensuring proper routing alongside existing plumbing and mechanical systems. Work completed same day to meet customer timeline requirements.

Responded to service call for kitchen light fixture experiencing rapid bulb failure and blinking issues. Upon inspection, traced electrical circuit back to main service panel to verify proper breaker operation and circuit integrity. Examined panel wiring connections, circuit breaker contacts, and verified no loose connections or signs of overheating that could cause voltage fluctuations to the affected kitchen lighting circuit. Documented panel configuration and wiring condition for service records.

Completed comprehensive cooling season tune-up on 10-year-old air conditioning system, including full system inspection, performance testing, and preventive maintenance procedures. Verified proper operation of blower motor assembly and electrical connections within air handler unit, confirmed all components functioning within manufacturer specifications. Installed new Filterbuy pleated air filter to ensure optimal airflow and system efficiency for continued operation.

Responded to service call for non-operational air conditioning system. Upon inspection, discovered evaporator coil and air filter heavily contaminated with dust, dirt, and debris buildup, significantly restricting airflow and preventing proper system operation. Documented existing conditions and contacted appropriate personnel regarding pricing for necessary cleaning and maintenance services.

Completed comprehensive cooling season tune-up on outdoor condensing unit located on side of home. Performed full system inspection including electrical connections, refrigerant levels, condenser coil cleaning, and operational testing. All components found functioning within normal parameters, unit operating efficiently with no immediate service needs identified.

Responded to service call for recurring AC condensate drain hose disconnection causing water leakage near furnace and indoor unit, with water damage occurring on carpeting. Upon inspection of 11-year-old Lennox system, found condensate drain line had been temporarily repaired previously but connection remained inadequate and prone to separation. Evaluated drain routing from evaporator coil and identified improper fitting connection at transition point near air handler. Disconnected existing temporary repair, cleaned pipe connections, and installed proper PVC coupling with primer and cement to create permanent sealed connection. Verified drain line slope for proper gravity drainage and secured all connections. Tested condensate drainage system by pouring water through drain pan to confirm positive flow without leaks at repair point. Inspected surrounding area for water damage and advised on monitoring carpet for complete drying. System operational with secure drain connections establish

Completed comprehensive air conditioning tune-up and maintenance on single outdoor condensing unit located on side of residence. Performed visual inspection of all accessible components including capacitor, electrical connections, and condenser coil; verified all wiring connections were secure with proper bundling; inspected condensate drain assembly for proper operation; examined condenser coil fins for debris and damage; confirmed unit mounted securely on concrete pad with adequate clearance. System found in good operating condition with all components functioning properly and no immediate service needs identified.

Responded to service call for 11-year-old outdoor A/C unit with damaged foam insulation on refrigerant line set. Upon inspection, found that the foam insulation covering the suction line had split open and deteriorated due to winter weather exposure. Replaced damaged foam insulation on exposed refrigerant piping to restore proper insulation and prevent efficiency loss and condensation issues.

Completed preventive maintenance tune-up on 8-year-old residential split-system air conditioning unit located on exterior side of home. Performed comprehensive cooling system inspection including condenser unit evaluation, refrigerant level check, electrical connection testing, and thermostat functionality verification. System operating properly with Nest thermostat displaying 69°F in cooling mode and outdoor condenser unit showing normal operation with clean airflow through heat exchanger coils.

Completed comprehensive cooling tune-up on 11-year-old outdoor condensing unit. Upon inspection, found condenser coils heavily soiled with dirt, dust, and debris accumulation causing significant airflow restriction. Performed thorough coil cleaning to restore proper heat transfer efficiency, removed access panel to access internal components, and took temperature differential readings using digital multimeter to verify system performance. Unit returned to optimal operating condition with improved airflow through coil assembly.

Completed preventive maintenance tune-up on residential air conditioning system. Performed comprehensive system diagnostics including amperage draw testing, temperature differential measurements, and visual inspection of all major components. Verified proper airflow through clean filter media and return air grille assembly, confirming system operating within manufacturer specifications.

Installed 50-gallon tall gas water heater in basement utility area. Completed all necessary copper piping connections, installed pressure relief valve assembly with discharge piping, and connected gas supply line with shutoff valve. Applied required plumbing identification sticker and ensured all work complied with permit #26PLU-06711. Unit tested and verified operational with all safety controls functioning properly.

Performed comprehensive cooling system tune-up on outdoor condensing unit located in side yard. Conducted electrical diagnostics using clamp meter, measuring amperage draw of 49 amps on compressor circuit, and inspected all wire connections at terminal block. Removed access panels to examine condenser coils and internal components, verified proper operation of all electrical connections, and completed standard maintenance procedures on unit under 10 years old per Home Depot service agreement specifications.

Responded to service call for newly installed Nest thermostat displaying "no power" error with HVAC system inoperative. Upon inspection, discovered improper low-voltage wiring connections at the air handler, with multiple wire terminations requiring correction. Rewired thermostat control circuit using proper wire nuts and connections, verified 24V power supply to thermostat, completed setup through Google Home app, and confirmed both heating and cooling functions operational.

Completed preventive maintenance tune-up on two HVAC systems at a residential property. The outdoor unit is a Goodman CAPF3636C8DB central air conditioner (approximately 20 years old), and the indoor air handler is located in the upstairs area. Performed comprehensive inspection of both units including filter check, electrical connections, refrigerant pressures, condensate drain lines, and overall system operation. Both systems are functioning within normal parameters and no immediate repairs were required at this time.

Completed installation of a 40-gallon tall gas water heater manufactured by State ProLine in utility closet. Connected all copper supply lines with blue-handled shut-off valves at top connections, installed black exhaust vent pipe for proper venting, and plumbed incoming cold water and outgoing hot water lines. Installed blue expansion tank on wall with proper copper piping connections and brass fittings to protect system from thermal expansion. Secured all connections with appropriate fittings and clamps, verified gas line connections at base of unit, and ensured all plumbing met code requirements per permit 26plu-06454. Applied required identification sticker to completed installation and tested system for proper operation and leak-free connections.

Responded to service call for older boiler unit located in garage experiencing leaking and overheating issues. Upon arrival, conducted thorough inspection of boiler system and surrounding mechanical equipment in utility space. Assessed visible piping, connections, and mechanical components to identify source of water leak and determine cause of overheating condition. Documented equipment condition and workspace setup for service records.

Completed plumbing rough-in installation for residential project including water supply lines and drainage system. Installed copper piping with brass fittings and water filtration component in upper level framing, along with PVC drainage assembly in lower level with proper venting and junction configurations. Performed water pressure testing to verify system integrity, followed by concrete patching of floor trenches where piping was installed. Retrieved testing equipment after successful inspection approval and completed final fixture installation including shower head in master bathroom.