HVAC, Plumbing & Electrical Services in Fairview Heights, IL

Completed comprehensive heating system tune-up on under 10-year-old unit located in basement. Performed full system inspection including internal heat exchanger examination using borescope camera to verify structural integrity and identify any signs of corrosion or deterioration. Verified thermostat operation and temperature calibration, confirming proper communication between control system and heating equipment with unit cycling correctly in heat mode.

Responded to service callback for intermittent garbage disposal switch operation. Upon inspection, identified faulty dual switch assembly on kitchen backsplash that was causing the disposal to shut off randomly during operation. Removed and replaced defective switch with new unit, verified proper wiring connections, and tested both switches for correct functionality. Disposal now operates consistently without interruption.

Responded to no cool complaint on ground-level outdoor condensing unit. Upon arrival, utilized digital manifold gauges to diagnose refrigerant system performance. Testing revealed inadequate cooling capacity due to system operating parameters outside normal specifications. Performed comprehensive diagnostic evaluation of compressor operation, refrigerant pressures, and overall system performance to identify root cause of insufficient cooling output reported by occupant.

Completed comprehensive electrical inspection of residential property including exterior meter box and main service panel. Documented current condition of electrical infrastructure with photographic evidence showing outdoor meter installation with proper clearance and interior panel configuration with main breaker and dual rows of branch circuit breakers. Assessed existing outlet conditions throughout property to prepare estimate for replacement work as requested.

Replaced failed ADP coil (serial number 7117e34270) in residential split system air conditioning unit. Retrieved replacement coil from warehouse, installed new evaporator coil in basement air handler, evacuated and recharged system with R-410A refrigerant to manufacturer specifications, and verified proper operation of heating and cooling functions using digital manifold gauges at outdoor condensing unit. Removed and disposed of defective coil, confirmed system pressures and temperatures within normal parameters, and left unit operational.

Completed comprehensive heating tune-up on 3-year-old furnace located in basement. Performed full system diagnostics using digital multimeter to verify electrical components, tested voltage and amperage readings on control board and safety circuits, and inspected all mechanical and electrical connections. All systems tested within manufacturer specifications and unit operating properly at time of departure.

Completed comprehensive heating tune-up on 16-year-old furnace located in basement. Removed and inspected heavily soiled air filter showing significant dust and debris accumulation, which was restricting airflow to the blower assembly. Performed standard maintenance procedures including inspection of electrical connections, pressure switches, and internal components to ensure safe and efficient operation for the heating season.

Inspected and tested double light switch and outlet as reported. Verified proper operation of decorative double toggle switch mounted on kitchen backsplash and adjustable spotlight fixture. All electrical components functioning correctly with no replacement necessary.

Completed furnace tune-up on a single heating unit located in the basement. Performed standard preventive maintenance inspection including filter check, burner examination, and system operation verification. Documented existing water damage or rust staining visible on wall surfaces near the HVAC installation area, noting the discoloration pattern consistent with moisture intrusion along corner seams. Unit operational at time of departure with no immediate service concerns identified during the tune-up procedure.

Responded to service call for 9-year-old ground-level AC unit experiencing intermittent buzzing noise occurring every 4-5 minutes. Performed diagnostic evaluation of the condenser unit and measured operating amperage at 6.90A using clamp meter to verify compressor performance and electrical draw. Unit was found operational at time of inspection; documented current conditions with no immediate repairs required at this time.

Responded to electrical safety concern in kitchen where homeowner experienced a power surge that damaged an appliance and discovered a loose wire behind the outlet during attempted replacement. Inspected electrical outlet and wiring, identified and secured loose connection in wall box, tested circuit for proper grounding and voltage stability, and replaced damaged outlet with new receptacle to ensure safe operation and prevent future electrical hazards.

Completed comprehensive heating tune-up on 6-year-old basement furnace unit, including full system inspection, combustion analysis, and filter replacement. Investigated customer concern regarding white residue on furnace pipe and documented findings with photos. System tested and verified operational with thermostat displaying proper heating function at 72°F setpoint.

Completed comprehensive heating tune-up on a 10+ year old furnace system located in basement. Performed standard maintenance procedures including filter inspection, burner assembly cleaning, heat exchanger examination, blower motor lubrication, and thermostat calibration. Observed and documented significant condensation accumulation on metal ductwork surfaces, indicating potential humidity issues or insufficient insulation that may require future attention to prevent moisture-related concerns.

Responded to no heat condition on HVAC system. Installed new inducer motor assembly to restore proper draft operation. Replaced deteriorated flue pipe system including 6x4x4 swivel tee, six 4-inch elbows, 16 feet of 4-inch pipe, and 3x4 reducer to ensure safe venting of combustion gases. Performed comprehensive heat cleaning to remove accumulated debris and optimize system efficiency. Verified proper operation of all components, confirmed adequate draft pressure, and tested system through complete heating cycle. Unit restored to full operational status with proper ventilation and combustion air flow.

Responded to callback for 3-year-old Lennox system displaying alert code 207 and water leakage from AC unit despite maintaining cooling function. Upon inspection, discovered significant water accumulation and staining on floor beneath air handler, active condensation present in drain pan, and severe corrosion along drain pan seams with deteriorated coating. Identified compromised drain pan integrity as source of water leakage causing system alert. Documented conditions with photographic evidence showing rust damage and moisture intrusion requiring drain pan replacement to prevent further water damage and resolve alert code.

Installed two 600 CFM bypass humidifiers and two APCO-X air purification systems on existing HVAC equipment. All components were properly mounted, connected to ductwork with appropriate fittings, and integrated with the furnace system to provide whole-home humidity control and indoor air quality improvement.

Completed pre-sale mechanical inspection and addressed multiple safety and maintenance concerns. Replaced deteriorated exhaust venting at first floor furnace and common vent tee for flue system. Located and repaired gas leaks in fuel runs, then marked all gas lines with yellow identification to differentiate from copper water lines per code requirements. Cleaned second floor AC unit condenser coil to restore proper airflow and system efficiency.

Completed installation of 600 CFM humidifier on existing HVAC system. Unit was properly mounted, water supply line connected with shutoff valve and insulated piping, and integrated with ductwork. System tested and confirmed operational.

Completed comprehensive Supertune maintenance service on a 10-year-old HVAC system with air conditioning and furnace units. Performed thorough inspection of outdoor condenser unit and basement furnace, verifying proper operation of both heating and cooling systems. Conducted detailed diagnostics using digital multimeter to measure electrical parameters including voltage and amperage, confirming all readings within manufacturer specifications. Measured supply air temperature and airflow at ceiling register using digital thermometer to verify system performance. Inspected all accessible components, tested system controls, and confirmed proper cycling of both AC and heating modes. System found to be operating efficiently with no deficiencies noted during tune-up service.

Responded to no heat call where system fan was operating but furnace failed to ignite. Upon inspection, discovered severely corroded ductwork and pipe connections with extensive rust damage at joints and elbow fittings, indicating prolonged moisture exposure that compromised system integrity. Documented deteriorated galvanized metal components and rust accumulation around coupling areas; recommended immediate replacement of affected ductwork sections to restore proper heating function and prevent further system degradation.